FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What causes the fuel pump to fail in a 2022 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What causes the fuel pump to fail in a 2022 Toyota Camry?

What causes the fuel pump to fail in a 2022 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0230, P0171
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
752 words

Problem Statement

Learn how to diagnose and repair fuel pump failure in a 2022 Toyota Camry with detailed symptoms, diagnostic steps, and repair instructions.

Error Code
P0230, P0171
Affected Component
fuel pump
Estimated Time
2-4 hours

Symptoms

  • •Engine Cranking but Not Starting
  • •Loss of Power During Acceleration
  • •Fuel Gauge Issues
  • •Unusual Sounds
  • •Check Engine Light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Fuel pressure gauge
  • •Fuel line disconnect tool
  • •Multimeter
  • •Jack and jack stands
  • •Socket set
  • •Screwdrivers
  • •New fuel pump
  • •Fuel filter
  • •Safety goggles
  • •Gloves

Additional Information

Error Code
P0230, P0171
Affected Component
fuel pump
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
11 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing Fuel Pump Failure in a 2022 Toyota Camry (XV70)

Step 1: Preliminary Checks
  • Visual Inspection: Check for any visible leaks around the fuel tank and fuel lines. Look for any damage to the fuel pump wiring harness.
  • Listen for Pump Operation: Turn the ignition to the 'ON' position without starting the engine. Listen for a faint whirring sound from the fuel tank for about 2 seconds, indicating the pump is priming.
Step 2: Scan for Diagnostic Codes
  • OBD-II Scanner: Use an OBD-II scanner to check for trouble codes. Look for codes such as P0230 (Fuel Pump Primary Circuit Malfunction) or P0171 (System Too Lean).
Step 3: Fuel Pressure Test
  • Tools Required: Fuel pressure gauge, fuel line disconnect tool.
  • Procedure:
    1. Locate the fuel rail on the engine.
    2. Connect the fuel pressure gauge to the fuel rail test port.
    3. Turn the ignition to the 'ON' position (do not start the engine) and check the pressure reading; it should typically be around 40-50 psi (consult the service manual for specific values).
    4. If the pressure is low, continue to the next steps.
Step 4: Electrical Testing
  • Tools Required: Multimeter.
  • Procedure:
    1. Disconnect the electrical connector from the fuel pump.
    2. Set the multimeter to measure DC voltage.
    3. Turn the ignition to the 'ON' position and check for voltage at the pump connector. You should see around 12V.
    4. If there is no voltage, trace back to the fuse and relay. Check the fuel pump relay and associated fuses for continuity.
Step 5: Fuel Pump Resistance Test
  • Tools Required: Multimeter.
  • Procedure:
    1. With the fuel pump disconnected, measure the resistance between the pump terminals.
    2. Compare the resistance reading with the manufacturer's specifications (usually a few ohms).
    3. An infinite reading indicates an open circuit, while a very low reading indicates a short.
Common Causes of Fuel Pump Failure
  • Contaminated Fuel: Dirt and debris can clog the pump.
  • Electrical Issues: Faulty wiring, poor ground connections, or relay failures.
  • Overheating: Running the pump dry or prolonged use can lead to overheating and failure.
  • Age and Wear: Although a 2022 model should be relatively new, excess wear can occur if the vehicle has been poorly maintained.
Repair Instructions
Step 1: Replace the Fuel Pump

Tools Required: Jack and jack stands, fuel line disconnect tool, socket set, screwdrivers, new fuel pump, fuel filter (recommended), safety goggles, gloves.

Procedure:

  1. Safety Precautions: Disconnect the negative battery cable to prevent sparks.
  2. Relieve Fuel Pressure: Remove the fuel pump relay and run the engine until it stalls to relieve pressure.
  3. Lift the Vehicle: Use a jack to lift the rear of the vehicle and securely place jack stands.
  4. Access the Fuel Pump:
    • If the pump is accessible through the trunk, remove the rear seat and access cover.
    • If not, remove the fuel tank by disconnecting the fuel lines and electrical connectors, and unbolting the tank straps.
  5. Remove the Old Pump: Disconnect the fuel lines, unscrew the retaining ring, and lift out the pump assembly.
  6. Install New Pump: Reverse the removal steps, ensuring all connections are tight and no leaks are present.
  7. Reinstall the Fuel Tank: If removed, reattach the tank and ensure the straps are secure.
  8. Reconnect Battery: Reconnect the negative battery cable and check for leaks by turning the ignition to 'ON' and checking the fuel pressure.
  9. Final Test: Start the engine to ensure proper operation.
Step 2: Additional Recommendations
  • Replace Fuel Filter: It’s good practice to replace the fuel filter to ensure that the new pump is not subjected to debris.
  • Use Quality Fuel: Always use high-quality fuel to prevent future fuel system issues.

By following these detailed steps, you can effectively diagnose and repair fuel pump failure in a 2022 Toyota Camry.