FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the typical issues with the tire pressure monitoring system in a 2022 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the typical issues with the tire pressure monitoring system in a 2022 Toyota Camry?

What are the typical issues with the tire pressure monitoring system in a 2022 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
656 words

Problem Statement

Learn about typical issues with the Tire Pressure Monitoring System (TPMS) in the 2022 Toyota Camry, including symptoms, diagnostic steps, and repair instructions.

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours

Symptoms

  • •TPMS Warning Light On
  • •Incorrect Tire Pressure Readings
  • •Warning Light Blinking
  • •Tire Pressure Sensor Faults
  • •System Reset Not Successful

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Calibrated tire pressure gauge
  • •OBD-II scanner
  • •TPMS diagnostic tool
  • •Tire iron or lug wrench
  • •Jack and jack stands
  • •Torque wrench
  • •Replacement tire pressure sensors (if needed)

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Typical Issues with the Tire Pressure Monitoring System (TPMS) in a 2022 Toyota Camry

The 2022 Toyota Camry, part of the eighth generation (XV70), may experience several common issues with its Tire Pressure Monitoring System (TPMS). Below are the symptoms, diagnostic steps, tools required, and repair instructions to address these issues.

Common Symptoms of TPMS Issues
  1. TPMS Warning Light On: The most obvious symptom is the TPMS warning light illuminating on the dashboard.
  2. Incorrect Tire Pressure Readings: The system may display inaccurate tire pressures.
  3. Warning Light Blinking: A blinking TPMS light can indicate a malfunction in the system.
  4. Tire Pressure Sensor Faults: The system may not recognize the sensors after a tire rotation or installation of new tires.
  5. System Reset Not Successful: After manually resetting, the warning light remains on.
Tools Required
  • Calibrated tire pressure gauge
  • OBD-II scanner
  • TPMS diagnostic tool
  • Tire iron or lug wrench
  • Jack and jack stands
  • Torque wrench
  • Replacement tire pressure sensors (if needed)
Repair Instructions

1. Resetting the TPMS

If the TPMS light is on after correcting tire pressures:

  • Step 1: Turn the ignition to the "ON" position (do not start the engine).
  • Step 2: Locate the TPMS reset button (usually found below the steering column).
  • Step 3: Press and hold the reset button until the TPMS light blinks three times and then turns off.
  • Step 4: Drive the vehicle for approximately 10 minutes to allow the system to recalibrate.

2. Replacing a Faulty Tire Pressure Sensor

If a sensor is determined to be faulty:

  • Step 1: Safely lift the vehicle using a jack and secure with jack stands.
  • Step 2: Remove the wheel using a tire iron.
  • Step 3: Remove the tire from the wheel using a tire machine, or take it to a tire shop if you don't have the equipment.
  • Step 4: Locate the tire pressure sensor inside the tire and detach the sensor from the valve stem.
  • Step 5: Install the new sensor by reversing the removal steps. Ensure to tighten the sensor securely to prevent leaks.
  • Step 6: Re-mount the tire onto the wheel and balance if necessary.
  • Step 7: Reinstall the wheel onto the vehicle and torque the lug nuts to the manufacturer’s specifications.
  • Step 8: Repeat the reset procedure to ensure the new sensor is recognized by the system.

3. Addressing Interference Issues

If interference is suspected:

  • Step 1: Inspect and remove any aftermarket devices that may affect TPMS signals, such as tire pressure monitoring tools or improperly installed electronics.
  • Step 2: Test the system again to see if the TPMS warning light remains off.
Conclusion

Regular maintenance and checks of the TPMS in your 2022 Toyota Camry can prevent issues from arising. If problems persist after diagnosis and repairs, consider consulting a professional technician for further assistance. Always refer to the vehicle's service manual for specific repair instructions and torque specifications.