FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the signs of a failing wheel bearing in a 2018 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the signs of a failing wheel bearing in a 2018 Toyota Camry?

What are the signs of a failing wheel bearing in a 2018 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
5 min read
811 words

Problem Statement

Learn about the symptoms of a failing wheel bearing in a 2018 Toyota Camry and follow the diagnostic and repair steps to ensure vehicle safety.

Affected Component
wheel bearing

Symptoms

  • •Grinding Noise
  • •Vibration
  • •Wheel Play
  • •Uneven Tire Wear
  • •ABS Warning Light
  • •Pulling to One Side

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket Set and Ratchet
  • •Torque Wrench
  • •Jack and Jack Stands
  • •Wheel Chocks
  • •Pry Bar
  • •Hammer (rubber or dead blow)
  • •Bearing Puller (if necessary)
  • •Grease or Wheel Bearing Grease
  • •Multimeter (for ABS diagnosis)
  • •Safety Glasses and Gloves

Additional Information

Affected Component
wheel bearing
Difficulty
medium
Severity
medium
Tools Required
10 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Signs of a Failing Wheel Bearing in a 2018 Toyota Camry

When a wheel bearing begins to fail, it can lead to various symptoms that may affect the vehicle's performance and safety. Here are the common signs that indicate a failing wheel bearing in a 2018 Toyota Camry:

Tools Required
  • Socket Set and Ratchet
  • Torque Wrench
  • Jack and Jack Stands
  • Wheel Chocks
  • Pry Bar
  • Hammer (rubber or dead blow)
  • Bearing Puller (if necessary)
  • Grease or Wheel Bearing Grease
  • Multimeter (for ABS diagnosis)
  • Safety Glasses and Gloves
Repair Instructions

Step 1: Preparation

  1. Park the Vehicle:

    • Ensure the vehicle is parked on a flat surface and engage the parking brake.

  2. Gather Tools:

    • Collect all necessary tools and safety equipment.

Step 2: Wheel Removal

  1. Loosen Lug Nuts:

    • Use a lug wrench to loosen the lug nuts on the wheel corresponding to the suspected failing bearing.

  2. Lift the Vehicle:

    • Use a jack to lift the vehicle and place it securely on jack stands.

  3. Remove the Wheel:

    • Completely remove the lug nuts and take off the wheel.

Step 3: Inspect and Replace Bearing

  1. Check for Damage:

    • Inspect the hub assembly and wheel bearing for any visible signs of damage.

  2. Remove the Hub Assembly (if necessary):

    • If replacement is needed, detach the brake caliper and rotor.
    • Use a socket wrench to remove the hub assembly bolts.
    • Carefully remove the hub assembly from the knuckle.

  3. Replace the Wheel Bearing:

    • If using a press, remove the old bearing from the hub using a bearing puller.
    • Install the new bearing using a hydraulic press or a suitable tool ensuring it is seated correctly.

  4. Reassemble Components:

    • Reinstall the hub assembly onto the knuckle, tightening the bolts to the manufacturer’s specifications.
    • Reattach the brake rotor and caliper.

Step 4: Reinstall Wheel and Lower the Vehicle

  1. Mount the Wheel:

    • Place the wheel back onto the hub, hand-tightening the lug nuts.

  2. Lower the Vehicle:

    • Carefully lower the vehicle back onto the ground and remove the jack stands.

  3. Tighten Lug Nuts:

    • Use a torque wrench to tighten the lug nuts to the manufacturer’s specified torque.

Step 5: Test Drive

  1. Take a Test Drive:

    • Drive the vehicle to ensure that the noise and vibration have been resolved. Monitor for any further issues.

  2. Recheck:

    • After a short drive, recheck the tightness of the lug nuts and inspect for any abnormal sounds or vibrations.
Conclusion

A failing wheel bearing can pose a serious safety risk, and it’s important to address any symptoms promptly. By following the outlined steps, you can diagnose and repair wheel bearing issues in a 2018 Toyota Camry effectively. Always consult the vehicle's service manual for specific torque settings and procedures.