FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common suspension issues in the 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common suspension issues in the 2020 Toyota Camry?

What are the common suspension issues in the 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
631 words

Problem Statement

Learn about common suspension issues in the 2020 Toyota Camry, including symptoms, causes, diagnostic steps, and repair instructions.

Affected Component
suspension

Symptoms

  • •Unusual Noises
  • •Bumpy Ride
  • •Pulling or Drifting
  • •Uneven Tire Wear
  • •Excessive Body Roll
  • •Nose Diving or Squatting

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Torque wrench
  • •Socket set
  • •Wrench set
  • •Pry bar
  • •Ball joint separator
  • •Alignment tool
  • •Suspension spring compressor
  • •Inspection mirror and flashlight

Additional Information

Affected Component
suspension
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Suspension Issues in the 2020 Toyota Camry

The 2020 Toyota Camry, part of the eighth generation (XV70), is known for its comfortable ride quality and reliable suspension system. However, like any vehicle, it can experience suspension-related issues. Below are common symptoms, potential causes, diagnostic steps, tools required, and repair instructions.

Common Symptoms of Suspension Issues
  1. Unusual Noises: Clunking, rattling, or popping sounds when driving over bumps or uneven surfaces.
  2. Bumpy Ride: Noticeable increase in ride harshness or a feeling of instability.
  3. Pulling or Drifting: Vehicle drifts to one side when driving straight, indicating alignment issues.
  4. Uneven Tire Wear: Tires show signs of uneven wear patterns.
  5. Excessive Body Roll: Increased body sway during cornering or turning.
  6. Nose Diving or Squatting: The front of the vehicle dips significantly when braking, or the rear squats under acceleration.
Common Causes of Suspension Issues
  • Worn out struts or shocks
  • Damaged or worn control arm bushings
  • Broken sway bar links
  • Failed or worn-out ball joints
  • Misalignment due to suspension component wear or impact
Tools Required
  • Jack and jack stands
  • Torque wrench
  • Socket set
  • Wrench set
  • Pry bar
  • Ball joint separator (if needed)
  • Alignment tool (if performing alignment)
  • Suspension spring compressor (for strut replacement)
  • Inspection mirror and flashlight
Repair Instructions

1. Replacing Worn Struts or Shocks:

  • Symptoms: Bumpy ride, excessive body roll.
  • Steps:
    1. Safely lift the vehicle and remove the front or rear wheels.
    2. Remove the strut assembly by unbolting the top mount and lower bolts.
    3. Compress the spring using a spring compressor, and remove the spring from the strut assembly.
    4. Install the new strut and reassemble with the spring. Ensure all bolts are torqued to specifications.
    5. Reinstall the wheel and lower the vehicle.

2. Replacing Control Arm Bushings:

  • Symptoms: Clunking noise, uneven tire wear.
  • Steps:
    1. Lift the vehicle and remove the wheel.
    2. Unbolt the control arm from the frame and the ball joint.
    3. Use a press or appropriate tool to remove the old bushings from the control arm.
    4. Install new bushings and reassemble the control arm.
    5. Reinstall the wheel and lower the vehicle.

3. Replacing Sway Bar Links:

  • Symptoms: Clunking noise over bumps.
  • Steps:
    1. Lift the vehicle and remove the wheel.
    2. Locate the sway bar link and unbolt it from the sway bar and control arm.
    3. Install the new sway bar link and torque to specifications.
    4. Reinstall the wheel and lower the vehicle.

4. Performing a Wheel Alignment:

  • Symptoms: Pulling or drifting.
  • Steps:
    1. After replacing any suspension components, take the vehicle to a professional alignment shop.
    2. Follow the technician’s guidance for alignment adjustments.
Conclusion

Addressing suspension issues promptly can prevent further damage and ensure safe driving conditions. Always refer to the vehicle's service manual for specific torque specifications and procedures. If you're unsure about any steps, consult a professional technician.