What are the common issues with the Toyota Safety Sense in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

medium

Difficulty

medium

Severity

4 min read

714 words

Problem Statement

Explore common issues with the Toyota Safety Sense system in the 2019 Toyota Camry, including symptoms, diagnostic steps, and repair instructions.

Affected Component

Toyota Safety Sense

Symptoms

•Adaptive Cruise Control (ACC) not functioning properly
•Pre-Collision System warnings appear intermittently
•Lane Departure Alert (LDA) not activating
•Adaptive Cruise Control not maintaining set speed
•Forward Collision Warning triggers unnecessarily
•Lane Tracing Assist not functioning
•Safety features sporadically activating or deactivating
•System errors displayed on the dashboard
•Warning messages for Safety Sense features not functioning
•Inconsistent operation of features

Diagnostic Steps

1
Check for any dashboard warning lights related to safety systems
2
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system
3
Inspect the camera located at the front of the vehicle for damage or obstruction
4
Use an OBD-II scanner to check for any radar-related DTCs
5
Inspect the radar sensor located in the front grille for damage or obstructions
6
Use an OBD-II scanner to check for software-related DTCs
7
Verify if the vehicle’s software is up to date
8
Inspect fuses related to the Safety Sense system
9
Check wiring and connectors leading to the camera and radar sensor

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Cleaning materials (soft cloth, water)
•Torque wrench
•Soft brush or cloth for cleaning
•Multimeter
•Fuse puller
•Basic hand tools (screwdrivers, wrenches)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Adaptive Cruise Control (ACC) not functioning properly

•Pre-Collision System warnings appear intermittently

•Lane Departure Alert (LDA) not activating

•Adaptive Cruise Control not maintaining set speed

•Forward Collision Warning triggers unnecessarily

•Lane Tracing Assist not functioning

•Safety features sporadically activating or deactivating

•System errors displayed on the dashboard

•Warning messages for Safety Sense features not functioning

•Inconsistent operation of features

Diagnostic Steps

1
Check for any dashboard warning lights related to safety systems
2
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system
3
Inspect the camera located at the front of the vehicle for damage or obstruction
4
Use an OBD-II scanner to check for any radar-related DTCs
5
Inspect the radar sensor located in the front grille for damage or obstructions
6
Use an OBD-II scanner to check for software-related DTCs
7
Verify if the vehicle’s software is up to date
8
Inspect fuses related to the Safety Sense system
9
Check wiring and connectors leading to the camera and radar sensor

Solution

Certainly! The Toyota Safety Sense (TSS) system in the 2019 Toyota Camry is designed to enhance safety with features such as Pre-Collision System, Lane Departure Alert, Adaptive Cruise Control, and Automatic High Beams. However, users may experience some common issues. Below, I’ll outline the symptoms, diagnostic steps, tools required, and repair instructions for these issues.

Common Issues with Toyota Safety Sense in 2019 Toyota Camry

1. Camera Calibration Issues

Symptoms:

Adaptive Cruise Control (ACC) not functioning properly.
Pre-Collision System warnings appear intermittently.
Lane Departure Alert (LDA) not activating.

Diagnostic Steps:

Check for any dashboard warning lights related to safety systems.
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
Inspect the camera located at the front of the vehicle for damage or obstruction (e.g., dirt, ice, or stickers).

Tools Required:

OBD-II scanner
Cleaning materials (soft cloth, water)
Torque wrench (if camera adjustment is needed)

Repair Instructions:

Inspect the Camera:
- Locate the forward-facing camera, typically mounted near the rear-view mirror.
- Clean the lens with a soft cloth and water to remove any obstructions.
Check for Damage:
- Inspect the camera assembly for any signs of damage or misalignment. If damaged, replacement may be necessary.
Calibration:
- If the camera is misaligned, calibration might be needed. This typically requires specialized equipment and should be performed at a dealership or specialized service shop.

2. Radar Sensor Issues

Symptoms:

Adaptive Cruise Control not maintaining set speed.
Forward Collision Warning triggers unnecessarily.
Lane Tracing Assist not functioning.

Diagnostic Steps:

Use an OBD-II scanner to check for any radar-related DTCs.
Inspect the radar sensor located in the front grille for damage or obstructions.

Tools Required:

OBD-II scanner
Torque wrench (if radar sensor adjustment is needed)
Soft brush or cloth for cleaning

Repair Instructions:

Inspect the Radar Sensor:
- Locate the radar sensor in the front grille area.
- Check for any obstructions (e.g., debris, ice) and clean it if necessary.
Check for Damage:
- Inspect the sensor for any physical damage. If damaged, the radar sensor may need to be replaced.
Calibration:
- If the sensor is functioning but misaligned, it may require recalibration. Consult the service manual for calibration procedures or take it to a dealership.

3. Software Issues

Symptoms:

Safety features sporadically activating or deactivating.
System errors displayed on the dashboard.

Diagnostic Steps:

Use an OBD-II scanner to check for software-related DTCs.
Verify if the vehicle’s software is up to date.

Tools Required:

OBD-II scanner
Access to Toyota’s Technical Service Bulletins (TSBs) and software updates.

Repair Instructions:

Check for Software Updates:
- Connect the OBD-II scanner to the vehicle and check for software version.
- Consult the Toyota TSB database for any updates related to Safety Sense.
Perform Software Update:
- If an update is available, follow the manufacturer’s instructions for updating the software. This may require a dealership visit.
Clear DTCs:
- After updating, clear any stored DTCs using the OBD-II scanner and test the system.

4. Electrical Issues

Symptoms:

Warning messages for Safety Sense features not functioning.
Inconsistent operation of features.

Diagnostic Steps:

Inspect fuses related to the Safety Sense system.
Check wiring and connectors leading to the camera and radar sensor.

Tools Required:

Multimeter
Fuse puller
Basic hand tools (screwdrivers, wrenches)

Repair Instructions:

Inspect Fuses:
- Locate the fuse box (refer to the owner’s manual) and check the fuses related to the Safety Sense system.
- Replace any blown fuses.
Check Wiring:
- Visually inspect the wiring and connectors for any fraying or corrosion.
- Use a multimeter to check for continuity in wiring and ensure proper voltage.
Repair or Replace:
- If any damaged wiring or connectors are found, repair or replace as necessary.

Conclusion

If the issues persist after performing these diagnostic and repair steps, it may be necessary to consult a qualified technician or take the vehicle to a Toyota dealership for further evaluation. Proper diagnosis and repair of the Toyota Safety Sense system are crucial for ensuring the effectiveness of the safety features.