FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common issues with the suspension system in a 2018 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common issues with the suspension system in a 2018 Toyota Camry?

What are the common issues with the suspension system in a 2018 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
786 words

Problem Statement

Explore common suspension problems in the 2018 Toyota Camry, including symptoms, diagnostic steps, and repair instructions to maintain vehicle performance.

Affected Component
suspension system

Symptoms

  • •Excessive bouncing after hitting bumps
  • •Poor handling during turns
  • •Increased stopping distance
  • •Visible oil leakage from strut/shock absorbers
  • •Clunking or knocking noises over bumps
  • •Loose or vague steering feel
  • •Uneven tire wear
  • •Vehicle pulls to one side while driving
  • •Steering wheel is off-center when driving straight
  • •Clunking noise during turns
  • •Body roll during cornering
  • •Reduced handling stability
  • •Vehicle not maintaining proper ride height
  • •Warning lights on the dashboard related to suspension
  • •Increased noise from the air compressor

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Floor jack and jack stands
  • •Tire pressure gauge
  • •Visual inspection tools (flashlight, mirror)
  • •Wrench set
  • •Bushing removal tool (if necessary)
  • •Alignment tool or alignment rack (for professional use)
  • •Socket set
  • •Torque wrench
  • •Diagnostic scanner
  • •Air pressure gauge
  • •Basic hand tools

Additional Information

Affected Component
suspension system
Difficulty
medium
Severity
medium
Tools Required
11 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Suspension Issues in a 2018 Toyota Camry

The suspension system in a 2018 Toyota Camry, part of the eighth generation (XV70), may encounter several common issues that can affect ride quality, handling, and overall vehicle performance. Here are some of the typical problems:

1. Worn Struts/Shocks

Symptoms:

  • Excessive bouncing after hitting bumps.
  • Poor handling during turns.
  • Increased stopping distance.
  • Visible oil leakage from strut/shock absorbers.

Diagnostic Steps:

  • Perform a bounce test by pushing down on the front or rear of the vehicle and observing how many times it bounces.
  • Inspect for oil leakage around the struts/shocks.
  • Check for abnormal tire wear patterns.

Tools Required:

  • Floor jack and jack stands
  • Tire pressure gauge
  • Visual inspection tools (flashlight, mirror)

Repair Instructions:

  1. Safely lift the vehicle using a floor jack and secure it with jack stands.
  2. Remove the wheel to access the strut/shock assembly.
  3. Inspect the strut/shock for signs of leakage or physical damage.
  4. If replacement is needed, remove the mounting bolts at the top and bottom of the strut/shock assembly.
  5. Install the new strut/shock, ensuring proper alignment of all bolts and torque specifications.
  6. Reinstall the wheel, lower the vehicle, and perform a test drive.
2. Broken or Worn Suspension Bushings

Symptoms:

  • Clunking or knocking noises over bumps.
  • Loose or vague steering feel.
  • Uneven tire wear.

Diagnostic Steps:

  • Visually inspect the suspension bushings for cracks, splits, or significant wear.
  • Grab the suspension components and shake to check for excessive movement.
  • Listen for noises while driving over uneven surfaces.

Tools Required:

  • Floor jack and jack stands
  • Wrench set
  • Bushing removal tool (if necessary)

Repair Instructions:

  1. Lift the vehicle and secure it with jack stands.
  2. Remove the wheels to access the suspension components.
  3. Identify the worn or broken bushings and remove any retaining bolts or clips.
  4. Use a bushing removal tool to extract the old bushings.
  5. Install new bushings, ensuring proper orientation.
  6. Reassemble all components, torque to specifications, and reinstall the wheels.
3. Misaligned Suspension

Symptoms:

  • Vehicle pulls to one side while driving.
  • Uneven tire wear.
  • Steering wheel is off-center when driving straight.

Diagnostic Steps:

  • Check tire pressure to ensure it's at the recommended level.
  • Inspect the alignment by measuring the distance between the front tires and verifying it against specifications.
  • Perform a road test to assess pulling direction.

Tools Required:

  • Alignment tool or alignment rack (for professional use)
  • Tire pressure gauge

Repair Instructions:

  1. If the vehicle is pulling, check tire pressures and adjust as needed.
  2. If misalignment is confirmed, take the vehicle to a professional alignment shop for precise adjustments.
  3. Ensure all suspension components are in good condition before alignment to avoid future issues.
4. Faulty Sway Bar Links

Symptoms:

  • Clunking noise during turns.
  • Body roll during cornering.
  • Reduced handling stability.

Diagnostic Steps:

  • Inspect sway bar links visually for signs of wear or damage.
  • Check for excessive movement when the sway bar is moved by hand.

Tools Required:

  • Socket set
  • Torque wrench
  • Jack and jack stands

Repair Instructions:

  1. Lift the vehicle and secure it with jack stands.
  2. Locate the sway bar links and inspect for damage or looseness.
  3. Remove the bolts securing the sway bar link to the sway bar and control arm using a socket set.
  4. Replace with new sway bar links, ensuring they are torqued to manufacturer specifications.
  5. Reinstall the wheels and lower the vehicle.
5. Air Suspension Issues (if equipped)

Symptoms:

  • Vehicle not maintaining proper ride height.
  • Warning lights on the dashboard related to suspension.
  • Increased noise from the air compressor.

Diagnostic Steps:

  • Check for air leaks by inspecting air lines and suspension bags.
  • Use a diagnostic scanner to check for any fault codes related to the air suspension system.

Tools Required:

  • Diagnostic scanner
  • Air pressure gauge
  • Basic hand tools

Repair Instructions:

  1. If fault codes are present, address them as indicated by the diagnostic scanner.
  2. Inspect air lines and suspension bags for leaks; repair or replace as necessary.
  3. Check the air compressor function to ensure it is working properly.
  4. Refill air suspension system if required and clear any fault codes.
Conclusion

Regular maintenance and inspection of the suspension system in a 2018 Toyota Camry can help prevent many of these issues. If any symptoms are noticed, it's advisable to address them promptly to ensure safe and comfortable vehicle operation. Always refer to the vehicle's service manual for specific torque specifications and procedures.