FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common engine issues reported by Toyota Camry Eighth Generation owners? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common engine issues reported by Toyota Camry Eighth Generation owners?

What are the common engine issues reported by Toyota Camry Eighth Generation owners?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
629 words

Problem Statement

Explore common engine issues reported by Toyota Camry Eighth Generation owners, including symptoms, diagnostic steps, and repair solutions.

Affected Component
engine

Symptoms

  • •Noticeable decrease in engine oil level between oil changes
  • •Excessive exhaust smoke (blue smoke)
  • •Rough idling
  • •Loss of power during acceleration
  • •Illuminated check engine light
  • •Noticeable vibration and/or noise when the engine is idling
  • •Temperature gauge reading higher than normal
  • •Warning lights
  • •Steam from under the hood
  • •Poor fuel economy
  • •Potential rough running

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Oil dipstick
  • •Oil catch pan
  • •Torque wrench
  • •Oil filter wrench
  • •Engine oil
  • •OBD-II scanner
  • •Spark plug socket
  • •Multimeter
  • •Fuel pressure gauge
  • •Socket set
  • •Vacuum gauge
  • •Coolant tester
  • •Thermostat wrench
  • •Radiator pressure tester
  • •Wrench set
  • •Exhaust gas analyzer (optional)

Additional Information

Affected Component
engine
Difficulty
medium
Severity
medium
Tools Required
16 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

The Toyota Camry Eighth Generation (2018-present, XV70) has been generally well-received for its reliability and performance. However, some common engine issues have been reported by owners. Below is a detailed overview of these issues, their symptoms, diagnostic steps, required tools, and potential repair solutions.

Common Engine Issues

  1. Oil Consumption

    • Symptoms: Noticeable decrease in engine oil level between oil changes, excessive exhaust smoke (blue smoke).
    • Diagnostic Steps:
      1. Check the oil level using the dipstick.
      2. Inspect for any visible oil leaks under the vehicle.
      3. Monitor oil consumption by measuring oil levels over a set period (e.g., 1,000 miles).
    • Tools Required:
      • Oil dipstick
      • Oil catch pan
      • Torque wrench
      • Oil filter wrench
      • Engine oil
    • Repair Instructions:
      1. If excessive oil consumption is confirmed, consider a top-end engine overhaul or valve seal replacement.
      2. If leaks are found, replace gaskets and seals as necessary.
      3. Regularly top off oil and monitor consumption until a permanent fix is applied.

  2. Engine Misfire

    • Symptoms: Rough idling, loss of power during acceleration, illuminated check engine light.
    • Diagnostic Steps:
      1. Use an OBD-II scanner to retrieve trouble codes.
      2. Inspect spark plugs and ignition coils for wear or damage.
      3. Check fuel injector operation and fuel pressure.
    • Tools Required:
      • OBD-II scanner
      • Spark plug socket
      • Multimeter
      • Fuel pressure gauge
    • Repair Instructions:
      1. Replace faulty spark plugs and ignition coils as indicated by diagnostic results.
      2. Clean or replace fuel injectors if they are clogged.
      3. Clear trouble codes and test drive the vehicle to confirm repairs.

  3. Vibration or Noise at Idle

    • Symptoms: Noticeable vibration and/or noise when the engine is idling.
    • Diagnostic Steps:
      1. Inspect engine mounts for wear or damage.
      2. Check for vacuum leaks around intake components.
      3. Listen for abnormal noises from the engine compartment.
    • Tools Required:
      • Socket set
      • Torque wrench
      • Vacuum gauge
    • Repair Instructions:
      1. Replace worn engine mounts as necessary.
      2. Use a smoke machine or carb cleaner to identify and seal vacuum leaks.
      3. Tighten or replace any loose components in the engine bay.

  4. Overheating

    • Symptoms: Temperature gauge reading higher than normal, warning lights, steam from under the hood.
    • Diagnostic Steps:
      1. Check coolant levels and inspect for leaks.
      2. Test the operation of the thermostat.
      3. Inspect the radiator and cooling fans for proper operation.
    • Tools Required:
      • Coolant tester
      • Thermostat wrench
      • Radiator pressure tester
    • Repair Instructions:
      1. If low on coolant, top off and check for leaks in hoses, the radiator, and the water pump.
      2. Replace a faulty thermostat if it does not open at the appropriate temperature.
      3. Ensure the radiator fans operate correctly; replace if necessary.

  5. Check Engine Light (CEL) due to Emissions Issues

    • Symptoms: CEL illuminated, poor fuel economy, potential rough running.
    • Diagnostic Steps:
      1. Use an OBD-II scanner to read trouble codes related to emissions (e.g., P0420 for catalytic converter efficiency).
      2. Inspect the exhaust system for leaks or damage.
      3. Check the condition of the catalytic converter and O2 sensors.
    • Tools Required:
      • OBD-II scanner
      • Exhaust gas analyzer (optional)
      • Wrench set
    • Repair Instructions:
      1. Replace O2 sensors or catalytic converter as required based on diagnostic codes.
      2. Repair any exhaust leaks that may affect sensor readings.
      3. Clear codes, perform a road test, and monitor for reoccurrence.
Conclusion

While the Toyota Camry Eighth Generation is largely reliable, these common engine issues can affect performance and satisfaction. By conducting thorough diagnostics and repairs using the outlined steps, owners can maintain their vehicles in optimal condition. Always refer to the specific service manual for your model year for detailed procedures and specifications.