how to reset the tire pressure light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

428 words

Problem Statement

Learn how to reset the tire pressure light on your Toyota Camry (2018-2023). Step-by-step guide with symptoms, diagnostic steps, and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface and that the parking brake is engaged before performing any resets.

1
Verify that all tires, including the spare (if applicable), are inflated to the recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Drive the vehicle for a short distance to see if the light resets automatically after the tires are adjusted.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

Tools Required: None specifically, but a tire pressure gauge may be helpful.
Ensure all tires are inflated to the manufacturer's recommended pressure (found on the driver’s side door jamb).

2. Reset the TPMS

Locate the TPMS Reset Button:
- The TPMS reset button is usually located beneath the steering wheel or on the dashboard.
Turn on the Ignition:
- Turn the ignition key to the "ON" position without starting the engine. If your Camry has a push-button start, press the button twice without pressing the brake pedal.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
Start the Engine:
- Start the engine and allow it to run for a few minutes. The tire pressure light should turn off, indicating that the system has been reset.
Check the Tire Pressure Light:
- If the light remains on, repeat the reset process or check for underlying issues in the TPMS.