how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

366 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-2023) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a flat surface to avoid rolling.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights activated
•Vehicle has been recently serviced

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the dashboard.
3
While holding the trip meter button, turn the ignition key to the 'ON' position (do not start the engine).
4
Continue to hold the trip meter button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the dashboard.
3
While holding the trip meter button, turn the ignition key to the 'ON' position (do not start the engine).
4
Continue to hold the trip meter button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Gather necessary tools:
- Ignition key or key fob
Ensure the vehicle is parked on a flat surface.

2. Reset the Maintenance Light

Turn Off the Vehicle
- Ensure the vehicle is completely off and in "Park" mode.
Press and Hold Trip Meter Reset Button
- Locate the trip meter reset button on the instrument panel.
- Press and hold the button until you are instructed to release it.
Turn Ignition On
- While holding the trip meter reset button, turn the ignition key to the "ON" position but do not start the engine.
Release the Trip Meter Button
- Continue holding the button until the maintenance light blinks and then turns off. This usually takes a few seconds.
Check the Light
- Turn the ignition off and then back to the "ON" position to verify that the maintenance light has indeed turned off.