how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

337 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) after an oil change. Step-by-step guide for a quick reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notifications for scheduled maintenance displayed
•Vehicle service history not updated

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'START' button twice without pressing the brake pedal to enter the 'ON' mode.
3
Navigate to the 'Settings' menu on the multi-information display using the steering wheel controls.
4
Select 'Maintenance' from the menu options.
5
Choose 'Oil Change' or the relevant service interval to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'START' button twice without pressing the brake pedal to enter the 'ON' mode.
3
Navigate to the 'Settings' menu on the multi-information display using the steering wheel controls.
4
Select 'Maintenance' from the menu options.
5
Choose 'Oil Change' or the relevant service interval to reset the maintenance light.

Solution

1. Preparation

Gather necessary tools: None required.
Ensure the vehicle is parked on a level surface and the engine is off.

Turn the ignition to the "ON" position by pressing the "START" button twice without starting the engine.
Use the steering wheel controls to navigate to the "Settings" icon on the multi-information display.

3. Reset the Maintenance Light

Select "Maintenance" from the settings menu.
Choose "Oil Change" or the relevant service item that requires resetting.
Confirm the reset by selecting "Yes" when prompted.

4. Verify the Reset

Turn the ignition off and then back on to check if the maintenance light has turned off.
Ensure that no other warning lights are illuminated.