FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on a Toyota Camry Eighth Generation (2018-present) - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/how to reset the maintenance light on a Toyota Camry Eighth Generation (2018-present)

how to reset the maintenance light on a Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
406 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) after maintenance. Step-by-step guide for a quick reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset procedure

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Vehicle owner has performed oil change or other scheduled maintenance
  • •No other warning lights are present indicating engine or system issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is parked safely with the ignition off.
2. Reset Maintenance Light

  1. Set Vehicle to ON Position

    • Insert the key into the ignition and turn it to the "ON" position without starting the engine.

  2. Prepare Odometer Display

    • Check that the odometer is showing the total mileage (not the trip mileage). If it’s not, toggle through the display options until it shows the total.

  3. Power Off the Ignition

    • Turn the ignition back to the "OFF" position completely.

  4. Press and Hold the Trip Button

    • Locate the "Trip" button on the instrument cluster and press it firmly.

  5. Turn Ignition Back ON

    • While continuing to hold the "Trip" button, turn the ignition back to the "ON" position.

  6. Complete the Reset

    • Keep holding the "Trip" button until the maintenance light resets. This typically takes a few seconds, and the odometer will display "000000" indicating the reset was successful.