how to reset the maintenance light in Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

324 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this step-by-step guide. Quick and easy instructions for maintenance light reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other vehicle performance issues present

Diagnostic Steps

1
Ensure the vehicle is turned off.
2
Press and hold the odometer reset button.
3
Turn the ignition to the 'ON' position without starting the engine.
4
Continue to hold the odometer reset button until the maintenance light blinks and then turns off.
5
Release the odometer reset button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked safely with the ignition in the "OFF" position.
Gather necessary tools: none required for this procedure.

2. Reset Maintenance Light

Press and Hold Odometer Reset Button
- Locate the odometer reset button on the instrument cluster.
- Press and hold this button.
Turn Ignition ON
- Without starting the engine, turn the ignition key to the "ON" position (press the start button twice without pressing the brake pedal if equipped with push start).
- Do not start the engine.
Wait for the Maintenance Light to Blink
- Keep the odometer reset button pressed and observe the maintenance light.
- The light should blink, then turn off after a few seconds.
Release the Odometer Reset Button
- Once the maintenance light is off, release the odometer reset button.