How do I reset the tire pressure monitoring system in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

494 words

Problem Statement

Learn how to reset the Tire Pressure Monitoring System (TPMS) in a 2019 Toyota Camry with step-by-step instructions and diagnostic tips.

Affected Component

Tire Pressure Monitoring System (TPMS)

Estimated Time

30 minutes

Symptoms

•Tire pressure warning light illuminated on the dashboard.
•Fluctuating or incorrect tire pressure readings.
•Warning message on the vehicle’s multi-information display (MID).

Diagnostic Steps

1
Check Tire Pressures: Ensure all tires are inflated to the recommended pressures listed on the driver’s side door jamb.
2
Inspect Tires: Look for any visible signs of damage, punctures, or leaks.
3
Check for Faulty TPMS Sensors: If the tire pressures are correct but the warning light remains on, there may be an issue with one or more TPMS sensors.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Tire inflator (if needed)
•Vehicle owner's manual (for reference)
•OBD-II scanner (optional for advanced diagnostics)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check Tire Pressures: Ensure all tires are inflated to the recommended pressures listed on the driver’s side door jamb.
2
Inspect Tires: Look for any visible signs of damage, punctures, or leaks.
3
Check for Faulty TPMS Sensors: If the tire pressures are correct but the warning light remains on, there may be an issue with one or more TPMS sensors.

Solution

Resetting the Tire Pressure Monitoring System (TPMS) in a 2019 Toyota Camry

Symptoms of a TPMS Issue:

Tire pressure warning light illuminated on the dashboard.
Fluctuating or incorrect tire pressure readings.
Warning message on the vehicle’s multi-information display (MID).

Diagnostic Steps:

Check Tire Pressures: Before resetting the TPMS, ensure all tires are inflated to the recommended pressures listed on the driver’s side door jamb.
Inspect Tires: Look for any visible signs of damage, punctures, or leaks.
Check for Faulty TPMS Sensors: If the tire pressures are correct but the warning light remains on, there may be an issue with one or more TPMS sensors.

Tools Required:

Tire pressure gauge
Tire inflator (if needed)
Vehicle owner's manual (for reference)
OBD-II scanner (optional for advanced diagnostics)

Repair Instructions:

Step 1: Check and Adjust Tire Pressure

Locate the Recommended Pressure: Check the sticker on the driver’s side door jamb for the recommended tire pressure.
Measure Tire Pressure: Use a tire pressure gauge to measure the pressure of each tire.
Inflate Tires: Inflate any tires that are below the recommended pressure. Ensure all tires are set to the correct pressure, including the spare (if equipped with TPMS).

Step 2: Reset the TPMS

Turn on the Ignition: Insert the key and turn the ignition to the "On" position without starting the engine.
Locate the TPMS Reset Button: The TPMS reset button is typically located under the steering wheel, near the left side of the dashboard. Refer to the owner’s manual if needed.
Press the TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
Start the Engine: Turn the ignition to the "Start" position to start the engine.
Drive the Vehicle: Drive the vehicle for approximately 10-15 minutes at speeds of 25 mph or above. This allows the TPMS to recalibrate and recognize the new tire pressures.

Step 3: Verify the Reset

Check the Dashboard: After driving, check if the TPMS warning light has turned off. If it remains illuminated, repeat the reset procedure.
Monitor Tire Pressures: Over the next few days, monitor the tire pressures to ensure they remain stable and that the TPMS system is functioning correctly.

Additional Considerations:

If the TPMS light continues to illuminate after resetting, it may indicate a faulty sensor or other TPMS-related issues, which may require further diagnostic tools or professional assistance.
After a tire rotation or replacement, the TPMS may need to be reset to recognize the new tire locations.

Conclusion:

Resetting the TPMS in a 2019 Toyota Camry is a straightforward process if the tire pressures are correct. Always address any underlying issues before resetting the system to ensure safety and proper vehicle operation. If problems persist, consider consulting a professional technician for further diagnostics.