FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I address issues with the car not unlocking with the remote on my 2020 Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I address issues with the car not unlocking with the remote on my 2020 Camry?

How do I address issues with the car not unlocking with the remote on my 2020 Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1 hour
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
587 words

Problem Statement

Learn how to diagnose and fix remote unlocking issues on your 2020 Toyota Camry with step-by-step instructions and required tools.

Affected Component
Key Fob / Keyless Entry System
Estimated Time
1 hour

Symptoms

  • •Remote key fob does not unlock the doors when the button is pressed.
  • •The vehicle may respond to the key fob (e.g., lights flash, horn beeps) but does not unlock.
  • •Unlocking works intermittently or only in close proximity.
  • •No response from the fob when attempting to lock or unlock.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver or a coin
  • •Replacement battery (CR2032)
  • •Visual inspection
  • •Multimeter
  • •OBD-II scanner

Additional Information

Affected Component
Key Fob / Keyless Entry System
Estimated Time
1 hour
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Addressing Remote Unlock Issues on a 2020 Toyota Camry

Step 1: Check the Key Fob Battery
  1. Symptoms: If the remote is unresponsive or works intermittently, the battery might be weak.
  2. Tools Required: Flathead screwdriver or a coin (to open the fob), replacement battery (CR2032).
Step 2: Inspect the Key Fob
  1. Symptoms: Physical damage or wear can affect performance.
  2. Tools Required: Visual inspection, possibly a multimeter to check the circuit.
  3. Check for: Cracks in the casing, stuck buttons, or moisture inside the fob.
Step 3: Reprogram the Key Fob
  1. Symptoms: The remote may lose its programming.
  2. Tools Required: None, but having another working fob can help.
Step 4: Check for Interference
  1. Symptoms: Working near other electronic devices can cause interference.
  2. Tools Required: None, just awareness of surroundings.
  3. Check for: Any nearby devices that may cause signal interference (e.g., other vehicles, electronic devices).
Step 5: Inspect the Vehicle's Receiver
  1. Symptoms: If the vehicle does not respond to any fob.
  2. Tools Required: OBD-II scanner for diagnostics, multimeter for electrical testing.
  3. Check the receiver’s connection: Ensure that the receiver module is securely connected, and check for blown fuses.
Repair Instructions
Step 1: Replace the Key Fob Battery
  1. Open the Fob: Use a flathead screwdriver or coin to gently pry open the key fob.
  2. Remove Old Battery: Take note of the battery orientation, and replace with a new CR2032 battery. Ensure it is seated securely.
  3. Reassemble the Fob: Snap the fob halves back together and test the remote.
Step 2: Reprogram the Key Fob
  1. Get in the Vehicle: Ensure all doors are closed.
  2. Insert the Key: Insert the key into the ignition and turn to the "ON" position (do not start the engine).
  3. Cycle the Key: Turn the key from "ON" to "OFF" five times, ending in "ON." The locks should cycle to indicate programming mode.
  4. Press the Unlock Button: Press the unlock button on the key fob within 20 seconds. The locks should cycle again.
  5. Complete Programming: Turn the ignition off and test the fob.
Step 3: Check for Interference
  1. Test in Different Locations: Move the vehicle to a different area away from potential signal interference.
  2. Try Another Key Fob: If available, test another key fob to see if the problem persists.
Step 4: Inspect the Vehicle's Receiver
  1. Locate the Receiver: Refer to the service manual for the location of the keyless entry receiver (usually under the dashboard or in the trunk).
  2. Check Connections: Ensure that all connectors are tight and that there are no signs of corrosion.
  3. Check Fuses: Locate the fuse box (typically under the dashboard on the driver's side) and check the fuse for the keyless entry system. Replace if necessary.
Conclusion

By following these steps, you should be able to diagnose and potentially resolve the issue with your 2020 Toyota Camry’s remote unlocking feature. If the problem persists after these troubleshooting steps, it may be necessary to consult a professional technician or visit a Toyota dealership for further diagnostics and repairs.