FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I troubleshoot the headlights flickering in my 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I troubleshoot the headlights flickering in my 2019 Toyota Camry?

How can I troubleshoot the headlights flickering in my 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
647 words

Problem Statement

Learn how to troubleshoot and fix flickering headlights in your 2019 Toyota Camry with our step-by-step guide.

Affected Component
headlights
Estimated Time
2-4 hours

Symptoms

  • •Headlights flicker intermittently or constantly while the vehicle is running.
  • •May be accompanied by dashboard lights dimming or flickering.
  • •Potentially related electrical issues or other accessories behaving erratically (e.g., radio, air conditioning).

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Multimeter
  • •Screwdriver (if necessary)
  • •Replacement bulbs
  • •Fuse puller
  • •Wire stripper/crimper (if repairs are needed)
  • •Wire brush (optional)

Additional Information

Affected Component
headlights
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting Headlights Flickering in a 2019 Toyota Camry

Step 1: Visual Inspection
  1. Tools Required: Flashlight
  2. Procedure:
    • With the vehicle off, check the headlight assemblies for any signs of moisture, corrosion, or physical damage.
    • Inspect the wiring harness connections at the headlight and the body for any loose connections or frayed wires.
    • Check the battery terminals for corrosion and a tight fit.
Step 2: Battery Condition Check
  1. Tools Required: Multimeter
  2. Procedure:
    • Start the vehicle and set the multimeter to DC voltage.
    • Measure the voltage across the battery terminals. You should see a reading between 13.7 to 14.7 volts when the engine is running.
    • If the voltage is below 13.7 volts, the battery may not be charging properly.
Step 3: Alternator Functionality Test
  1. Tools Required: Multimeter
  2. Procedure:
    • With the engine running, measure the voltage at the alternator output terminal (usually near the battery).
    • Perform the same voltage check as in Step 2.
    • If the voltage is below 13.7 volts at the alternator, the alternator may be faulty and needs replacement.
Step 4: Ground Integrity Check
  1. Tools Required: Multimeter, wire brush (optional)
  2. Procedure:
    • Locate the ground connection for the headlight circuit, typically found near the battery and the engine block.
    • Inspect the ground connection for corrosion or loose connections.
    • Clean any corrosion with a wire brush and ensure the connection is tight.
    • Measure the resistance from the ground to the negative battery terminal. A reading above 0.2 ohms indicates a poor ground.
Step 5: Inspect Headlight Bulbs
  1. Tools Required: Screwdriver (if necessary), replacement bulbs
  2. Procedure:
    • Remove the headlight assembly as per the vehicle’s service manual.
    • Inspect the bulbs for signs of damage, such as a broken filament or discoloration.
    • Replace any faulty bulbs with OEM or high-quality aftermarket bulbs.
Step 6: Check Headlight Relay and Fuses
  1. Tools Required: Multimeter, fuse puller
  2. Procedure:
    • Locate the fuse and relay panel (typically under the dashboard or in the engine compartment).
    • Inspect the headlight fuse(s) for continuity using the multimeter. Replace any blown fuses.
    • Check the headlight relay by swapping it with a similar relay in the panel. If the flickering stops, replace the faulty relay.
Step 7: Inspect Wiring Harness
  1. Tools Required: Multimeter, wire stripper/crimper (if repairs are needed)
  2. Procedure:
    • Trace the wiring harness from the battery to the headlights for any signs of wear, fraying, or short circuits.
    • If any damaged wires are found, repair or replace them as necessary.
Repair Instructions
Step 1: Replace Headlight Bulbs
  1. Remove the headlight assembly.
  2. Disconnect the wiring harness from the bulb.
  3. Remove the bulb by turning it counterclockwise.
  4. Insert the new bulb and reconnect the wiring harness.
  5. Reassemble the headlight assembly.
Step 2: Replace the Alternator (if needed)
  1. Disconnect the negative battery terminal.
  2. Remove the drive belt from the alternator.
  3. Disconnect the electrical connectors and mounting bolts from the alternator.
  4. Install the new alternator and reconnect all components.
  5. Reconnect the negative battery terminal and recheck the voltage.
Step 3: Secure Ground Connections
  1. Clean and tighten any loose ground connections identified during inspection.
  2. Verify the integrity of the connections using a multimeter.
Conclusion

After following the above steps, start the vehicle and observe if the flickering has stopped. If the issue persists, it may require professional diagnosis, possibly involving deeper electrical system evaluations that may include the vehicle’s Body Control Module (BCM) or other electronic components.