FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I troubleshoot a faulty ignition switch in a 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I troubleshoot a faulty ignition switch in a 2020 Toyota Camry?

How can I troubleshoot a faulty ignition switch in a 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
694 words

Problem Statement

Learn how to troubleshoot and replace a faulty ignition switch in a 2020 Toyota Camry with step-by-step diagnostic and repair instructions.

Affected Component
ignition switch
Estimated Time
2-3 hours

Symptoms

  • •Engine Does Not Start
  • •Intermittent Electrical Issues
  • •No Dashboard Lights
  • •Key Stuck in Ignition

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II Scanner
  • •Screwdrivers (Phillips and flat-head)
  • •Torx driver set
  • •Trim removal tool
  • •Ratchet and socket set
  • •Pliers
  • •Electrical contact cleaner

Additional Information

Affected Component
ignition switch
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting a Faulty Ignition Switch in a 2020 Toyota Camry

Tools Required
  • Multimeter
  • OBD-II Scanner
  • Screwdrivers (Phillips and flat-head)
  • Torx driver set
  • Trim removal tool
  • Ratchet and socket set
  • Pliers
  • Electrical contact cleaner
Step 1: Initial Inspection

  1. Check the Battery:

    • Ensure the car battery is fully charged and the terminals are clean and tightly connected.
    • Use a multimeter to check the voltage of the battery; it should read around 12.6 volts when the engine is off.

  2. Examine Fuses:

    • Locate the fuse box (usually under the dashboard or in the engine compartment).
    • Inspect the fuses related to the ignition system. Replace any blown fuses.
Step 2: Key and Transponder Check

  1. Inspect Key Condition:

    • Check for any physical damage or wear on the key. If it appears worn, consider using a spare key.

  2. Transponder Functionality:

    • If equipped with a transponder, ensure the chip is intact. If the key is damaged, it might not communicate with the ignition system.
Step 3: Testing the Ignition Switch

  1. Access the Ignition Switch:

    • Use a trim removal tool to carefully pry off the plastic cover around the steering column.
    • Remove the screws securing the ignition switch assembly using the appropriate Torx driver.

  2. Disconnect the Ignition Switch:

    • Locate the wiring harness connected to the ignition switch and carefully disconnect it.

  3. Test the Ignition Switch:

    • Using a multimeter, set it to the continuity setting.
    • Connect the multimeter leads to the appropriate terminals on the ignition switch:
      • Terminal 1: Normally open when the key is in the "Off" position; should show continuity when turned to "On".
      • Terminal 2: Normally closed; should show continuity in the "Off" position.
    • If there is no continuity where expected, the ignition switch is faulty and needs replacement.
Step 4: Scan for Diagnostic Trouble Codes (DTCs)

  1. Use an OBD-II Scanner:

    • Connect the scanner to the OBD-II port and check for any relevant trouble codes related to the ignition system or anti-theft system.

  2. Interpret Codes:

    • Look for codes like P0606, P0513, or any other that may indicate an ignition switch issue. Document any codes for reference.
Repair Instructions
Step 1: Replace the Ignition Switch

  1. Purchase a Replacement Ignition Switch:

    • Ensure you have the correct part for your specific model and year.

  2. Install the New Ignition Switch:

    • Align and connect the new ignition switch to the wiring harness.
    • Secure the ignition switch using the screws removed earlier.

  3. Reassemble the Steering Column Cover:

    • Reattach the plastic cover around the steering column, ensuring all clips are securely in place.
Step 2: Final Testing

  1. Reconnect the Battery:

    • If disconnected, reattach the negative terminal of the battery.

  2. Test the Functionality:

    • Insert the key and turn to the "On" position. Check for dashboard lights.
    • Attempt to start the engine.
    • Test all electrical accessories for proper functionality.

  3. Clear DTCs:

    • If any trouble codes were logged, clear them using the OBD-II scanner.
Step 3: Road Test
  1. Perform a Road Test:
    • Take the vehicle for a short drive to ensure that the new ignition switch operates correctly under various conditions.
Conclusion

If after following these steps the symptoms persist, further diagnostics may be needed, potentially involving other components of the ignition system or the vehicle's anti-theft system. In such cases, consulting with a professional technician or your local Toyota dealer may be advisable.