How can I reset the maintenance light on a 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

easy

Difficulty

low

Severity

3 min read

436 words

Problem Statement

Learn how to easily reset the maintenance light on your 2020 Toyota Camry with this step-by-step guide.

Affected Component

Maintenance Light

Symptoms

•The maintenance light on the dashboard illuminates after the scheduled maintenance interval has been reached.
•The light may appear as 'Maintenance Required' or as a small wrench icon.

Diagnostic Steps

1
Confirm the Maintenance Interval: Verify that the maintenance work has been completed.
2
Check the Owner’s Manual: Review the vehicle's owner’s manual to ensure that the maintenance light is related to the maintenance schedule and not a fault indicator.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools are required for this procedure.
•You may need a pen and paper to note down any maintenance records if necessary.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the maintenance light on a 2020 Toyota Camry is a straightforward process. Below is a detailed guide that includes symptoms, diagnostic steps, tools required, and the reset instructions.

Tools Required

No special tools are required for this procedure.
You may need a pen and paper to note down any maintenance records if necessary.

Reset Instructions

Follow these steps to reset the maintenance light on a 2020 Toyota Camry:

Step 1: Turn the Ignition Off

Ensure the vehicle is in the "OFF" position. If the engine is running, turn it off completely.

Step 2: Access the Ignition Position

Insert the key fob into the ignition slot.
Press the "START" button without pressing the brake pedal. This will put the car in "ON" mode (not running).

Step 3: Navigate to the Settings

On the dashboard, locate the steering wheel controls.
Use the controls to navigate to the “Settings” menu on the Multi-Information Display (MID).
Scroll down to the “Maintenance” section.

Step 4: Reset the Maintenance Light

In the “Maintenance” section, select “Oil Maintenance” or the relevant maintenance type you wish to reset.
Press and hold the “OK” button (or the center button on the steering wheel) while the "Reset" option is highlighted.
A confirmation message will appear asking if you want to reset the maintenance data. Confirm the reset.

Step 5: Verify the Reset

After resetting, the maintenance light should turn off.
To verify, turn off the vehicle completely and then restart it. The maintenance light should remain off if the reset was successful.

Final Notes

If the maintenance light does not reset after following these steps, double-check that the maintenance was performed and that you are in the correct menu.
If there are other warning lights illuminated, consult the owner's manual or a professional technician to diagnose further issues.

By following these steps, you should successfully reset the maintenance light on your 2020 Toyota Camry. If you encounter any issues, consider consulting a professional technician for further assistance.