FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Toyota Camry Seventh Generation (2012-2017) brake pedal goes to the floor what to do - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/Toyota Camry Seventh Generation (2012-2017) brake pedal goes to the floor what to do

Toyota Camry Seventh Generation (2012-2017) brake pedal goes to the floor what to do

Toyota Camry Seventh Generation (2012-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
critical
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
610 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the brake pedal going to the floor in a 2012-2017 Toyota Camry. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before working on the braking system.

Symptoms

  • •Brake pedal travels to the floor with little resistance
  • •Warning light illuminated on the dashboard
  • •Brake fluid warning light activated
  • •Reduced braking effectiveness
  • •Brake fluid leak observed under the vehicle
  • •Unusual noises (grinding or hissing) when braking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Line wrench
  • •Brake fluid siphon
  • •OBD-II scanner
  • •Torque wrench
  • •Brake bleeder kit

Parts Required

  • •Brake fluid (DOT 3 or DOT 4)
  • •Brake lines or hoses (if damaged)
  • •Brake master cylinder (if faulty)
  • •Brake pads and rotors (if worn)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
critical
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a level surface and secure it with wheel chocks.
  • Disconnect the negative battery terminal.
2. Check and Replace Brake Fluid
  • Sub-steps:
    1. Remove the master cylinder reservoir cap and inspect the fluid condition. If low or contaminated, proceed to replace.
    2. Use a brake fluid siphon to remove old fluid from the reservoir.
    3. Refill the reservoir with the appropriate type of brake fluid (DOT 3 or DOT 4).
    4. Reinstall the cap securely.
3. Inspect and Repair Brake Lines
  • Sub-steps:
    1. Visually inspect all brake lines and hoses for cracks, corrosion, or leaks.
    2. If any leaks are found, replace the damaged section of the brake line or hose.
    3. Use a line wrench to disconnect and reconnect lines, ensuring proper sealing to avoid leaks.
    4. Bleed the brakes to remove any air from the system once lines are repaired.
4. Inspect and Replace Brake Master Cylinder
  • Sub-steps:
    1. Disconnect the brake lines from the master cylinder using a line wrench.
    2. Remove the master cylinder from its mounting bracket (typically 2-4 bolts).
    3. Install the new master cylinder, ensuring it is aligned properly.
    4. Reconnect the brake lines and torque them to the manufacturer’s specifications.
    5. Bleed the brake system to eliminate air.
5. Verify Brake Booster Functionality
  • Sub-steps:
    1. Inspect the vacuum hose connected to the brake booster for cracks or disconnections.
    2. Test the brake booster by pushing down the brake pedal with the engine off; it should feel firm.
    3. Start the engine and press the brake pedal; it should feel softer and provide assist. If not, replace the brake booster.