FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Camry's transmission slips when shifting what should I check - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/my Toyota Camry's transmission slips when shifting what should I check

my Toyota Camry's transmission slips when shifting what should I check

Toyota Camry Seventh Generation (2012-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
574 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Toyota Camry. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the transmission system.

Symptoms

  • •Transmission slips between gears
  • •Delayed engagement when shifting from park to drive
  • •Unusual engine revving without corresponding acceleration
  • •Check engine light illuminated
  • •Fluid leaks under the vehicle
  • •Grinding or whining noise during shifts

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Drain pan
  • •Funnel
  • •Torque wrench

Parts Required

  • •Transmission fluid (specific to vehicle model)
  • •Transmission filter
  • •New gasket or sealant for transmission pan

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  1. Gather tools and materials including a socket set, transmission fluid, and an OBD-II scanner.
  2. Park the vehicle on a level surface and set the parking brake.
  3. Allow the engine to cool down before starting work.
2. Check Transmission Fluid
  1. Locate the transmission dipstick (if applicable) and remove it.
  2. Wipe the dipstick clean with a lint-free cloth.
  3. Reinsert the dipstick fully and remove it again to check the fluid level.
  4. If the fluid is low, add the appropriate transmission fluid as specified in the owner's manual.
3. Change Transmission Fluid and Filter

  1. Drain Fluid:

    • Place a drain pan under the transmission pan.
    • Remove the transmission pan bolts using a socket set.
    • Carefully lower the pan and allow fluid to drain completely.

  2. Replace Filter:

    • Remove the old transmission filter and discard it.
    • Install the new transmission filter, ensuring it is seated properly.

  3. Reinstall Transmission Pan:

    • Clean the transmission pan and the sealing surface on the transmission.
    • Apply a new gasket or sealant if required.
    • Reattach the pan and torque the bolts to the manufacturer's specified torque value.

  4. Refill Transmission Fluid:

    • Use a funnel to add the correct type and amount of transmission fluid through the dipstick tube.
4. Check for Error Codes
  1. Connect the OBD-II scanner to the vehicle's diagnostic port.
  2. Retrieve any stored error codes and note them for reference.
  3. Address any codes related to the transmission or TCM.
5. Inspect Wiring and Connectors
  1. Locate the wiring harnesses connected to the transmission.
  2. Inspect for any signs of damage, corrosion, or loose connections.
  3. Repair or replace any faulty wiring or connectors.