FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
373 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry. Step-by-step guide to ensure your vehicle's maintenance light is off.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No change in the vehicle's performance
  • •Reminder message displayed on the multi-information display

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface and the engine is off.
  • Gather necessary tools: None required for this procedure.
2. Reset the Maintenance Light

  1. Turn the Ignition On:

    • Without starting the engine, press the power button or turn the key to the "Run" position.

  2. Set Odometer:

    • Press the trip meter button until the odometer displays the total mileage (not trip A or B).

  3. Turn Off Ignition:

    • Turn the ignition off completely.

  4. Press and Hold the Trip Meter Reset Button:

    • Press and hold the trip meter reset button located on the dashboard.

  5. Turn the Ignition On Again:

    • While holding the trip meter reset button, turn the ignition back to the "Run" position.

  6. Wait for the Maintenance Light to Reset:

    • Continue holding the trip meter reset button until the maintenance light flashes and then turns off.

  7. Release the Trip Meter Reset Button:

    • Once the light goes off, release the button.
3. Finalize
  • Turn off the ignition and then start the engine to ensure the maintenance light remains off.