FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
392 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Vehicle owner's manual indicates maintenance is due
  • •Recent oil change or other scheduled maintenance has been performed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: Odometer reset button (no special tools required).
  • Ensure the vehicle is parked on a level surface and is in the "OFF" position.
2. Resetting the Maintenance Light

  1. Press the Odometer Reset Button

    • Locate the odometer reset button on the instrument cluster.
    • Press and hold the button down continuously.

  2. Turn the Ignition to "ON"

    • With the odometer reset button still pressed, turn the ignition key to the "ON" position (do not start the engine).
    • The dashboard lights will illuminate, but the engine will remain off.

  3. Wait for the Maintenance Light to Reset

    • Keep holding the odometer reset button for about 10 seconds.
    • Observe the maintenance light; it should blink and then turn off.

  4. Release the Odometer Reset Button

    • Once the maintenance light has turned off, release the odometer reset button.

  5. Turn the Ignition Off

    • Turn the ignition key back to the "OFF" position.
    • Start the vehicle to ensure the maintenance light remains off.