my Tesla Model Y Current (2020-present) has a check charging system message

Tesla Model Y Current (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

541 words

Problem Statement

Learn how to diagnose and fix the 'Check Charging System' message in Tesla Model Y. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in Park mode before performing any repairs.
•Disconnect power sources when working on electrical systems.

Symptoms

•Check charging system message illuminated on the display
•Reduced charging speed or failure to charge
•Battery range not increasing during charging
•Possible overheating of charging components
•Inconsistent charging behavior (intermittent charging)

Diagnostic Steps

1
Check the vehicle's battery level and charging status via the touchscreen display.
2
Inspect the charging cable for any visible damage or wear.
3
Test the wall charger or charging station for functionality using a different vehicle.
4
Scan the vehicle for error codes using a Tesla diagnostic tool or service equipment.
5
Inspect the vehicle's charging port for debris or foreign objects that may obstruct the connection.
6
Verify the condition of the 12V battery, as it can impact charging performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Soft brush or compressed air
•Torque wrench

Parts Required

•Replacement 12V battery (if required)
•New charging cable (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle's battery level and charging status via the touchscreen display.
2
Inspect the charging cable for any visible damage or wear.
3
Test the wall charger or charging station for functionality using a different vehicle.
4
Scan the vehicle for error codes using a Tesla diagnostic tool or service equipment.
5
Inspect the vehicle's charging port for debris or foreign objects that may obstruct the connection.
6
Verify the condition of the 12V battery, as it can impact charging performance.

Solution

1. Preparation

Gather tools and ensure the vehicle is parked on a flat surface.
Disconnect the vehicle from the charging station.
Safety Warning: Ensure the vehicle is in Park mode before performing any repairs.

2. Inspect and Clean Charging Port

Open the charging port cover.
Using a soft brush or compressed air, gently clean the charging port to remove any debris.
Ensure the charging connector is free from dirt and damage.

3. Inspect Charging Cable and Connection

Examine the charging cable for any frays or physical damage.
Test the cable connection at both ends (vehicle and charging station) to ensure a secure fit.
If damage is found, replace the charging cable.

4. Check and Replace 12V Battery (if necessary)

Use a multimeter to check the voltage of the 12V battery; it should be around 12.6 volts when fully charged.
If the voltage is low, proceed to replace the 12V battery.
- Sub-steps:
  - Disconnect the negative terminal first, followed by the positive terminal.
  - Remove the battery hold-down bracket and lift the battery out.
  - Install the new battery, connect the positive terminal first, then the negative terminal.
Safety Warning: Dispose of the old battery according to local regulations.

5. Reset Charging System

Reboot the vehicle's software by holding down both scroll wheels on the steering wheel until the touchscreen resets.
Reconnect to the charging station and test the charging functionality.