how to reset the check engine light on Tesla Model Y Current (2020-present)

Tesla Model Y Current (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

376 words

Problem Statement

Learn how to reset the check engine light on Tesla Model Y (2020-present) with step-by-step instructions and diagnostic tips for optimal performance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing any resets.

Symptoms

•Check engine light illuminated on the dashboard
•Reduced power or performance
•No other visible symptoms

Diagnostic Steps

1
Ensure the vehicle is parked and in 'Park' mode.
2
Access the touchscreen display and navigate to the 'Service' menu.
3
Check for any diagnostic trouble codes (DTCs) to confirm the underlying issue by selecting 'Vehicle' > 'Service' > 'Diagnostics.'
4
Document the codes for reference and reset if applicable.
5
Turn off the vehicle and exit the cabin.
6
Wait for 5 minutes to allow the vehicle's systems to reset fully.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla vehicle touchscreen interface

Parts Required

•No specific parts required for resetting the check engine light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked and in 'Park' mode.
2
Access the touchscreen display and navigate to the 'Service' menu.
3
Check for any diagnostic trouble codes (DTCs) to confirm the underlying issue by selecting 'Vehicle' > 'Service' > 'Diagnostics.'
4
Document the codes for reference and reset if applicable.
5
Turn off the vehicle and exit the cabin.
6
Wait for 5 minutes to allow the vehicle's systems to reset fully.

Solution

1. Preparation

Ensure the vehicle is parked and powered on.
Gather necessary tools: access to the Tesla touchscreen interface.

On the Tesla touchscreen, tap on "Service" located at the bottom of the main screen.
Select “Clear DTCs” if any trouble codes are present. This action will reset the check engine light.

3. Restart Vehicle

Turn off the vehicle completely by pressing the brake pedal and holding the “Power” button until the screen goes dark.
Wait for approximately 30 seconds.
Press the “Power” button again to turn the vehicle back on.

4. Verify Reset

After the vehicle reboots, check the dashboard for the check engine light.
If the light remains illuminated, recheck diagnostic codes to determine if the issue persists.