how to fix Tesla Model Y Current (2020-present) key fob not working

Tesla Model Y Current (2020-present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

464 words

Problem Statement

Learn how to fix a non-working key fob for Tesla Model Y (2020-present). Step-by-step guide for battery replacement and re-pairing instructions.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Handle the key fob carefully to avoid damaging the internal circuitry.

Symptoms

•Key fob not recognized by the vehicle
•Vehicle won’t unlock when the fob is near
•Inability to start the vehicle using the fob
•Warning message on the dashboard regarding key fob
•Battery indicator for the fob displays low power

Diagnostic Steps

1
Check the key fob battery level using the Tesla app.
2
Inspect the key fob for physical damage or wear.
3
Attempt to unlock the vehicle using the Tesla app to rule out other issues.
4
Try replacing the key fob battery with a new CR2032 battery.
5
Re-pair the key fob with the vehicle through the settings menu.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•Cleaning cloth

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the key fob battery level using the Tesla app.
2
Inspect the key fob for physical damage or wear.
3
Attempt to unlock the vehicle using the Tesla app to rule out other issues.
4
Try replacing the key fob battery with a new CR2032 battery.
5
Re-pair the key fob with the vehicle through the settings menu.

Solution

1. Preparation

Gather tools: small flathead screwdriver, new CR2032 battery, and cleaning cloth.
Ensure the vehicle is parked in a safe location.

2. Replace Key Fob Battery

Open the Key Fob:
- Use the small flathead screwdriver to gently pry open the key fob casing along the seam.
- Take care not to damage the casing or internal components.
Remove Old Battery:
- Once the fob is open, carefully detach the old CR2032 battery from its holder.
- Note the orientation of the battery for correct installation of the new one.
Install New Battery:
- Insert the new CR2032 battery, ensuring it is positioned the same way as the old one (positive side facing up).
Reassemble the Key Fob:
- Align the two halves of the fob and press them together until they click back into place.
- Ensure there are no gaps in the casing.

3. Re-Pair Key Fob (if necessary)

Access Tesla Settings:
- Sit inside the vehicle and power it on.
- Go to 'Controls' > 'Locks' on the touchscreen.
Add Key Fob:
- Tap on 'Add Key' and follow the on-screen instructions.
- Place the new key fob on the center console when prompted to complete the pairing process.