my Tesla Model 3 Original (2017-2023) is shaking at high speeds what's happening

Tesla Model 3 Highland (2024-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

508 words

Problem Statement

Learn how to diagnose and fix shaking issues at high speeds in Tesla Model 3 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety goggles and gloves when working on vehicles.
•Ensure the vehicle is securely lifted with jack stands if working underneath.

Symptoms

•Shaking or vibrations noticeable in the steering wheel or floorboard at speeds above 50 mph
•Unusual noise coming from the wheels
•Uneven tire wear or visible damage on tires
•Vehicle pulling to one side while driving
•Steering wheel is off-center while driving straight

Diagnostic Steps

1
Inspect tire pressures to ensure they are within manufacturer specifications.
2
Examine tires for visible damage, such as bulges or uneven wear patterns.
3
Perform a wheel balance check to identify if any wheels are out of balance.
4
Inspect suspension components (shocks, struts, bushings) for signs of wear or damage.
5
Check for proper alignment of the front and rear wheels.
6
Test drive the vehicle to replicate the shaking and confirm conditions under which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Socket set
•Wheel balancer
•Alignment machine

Parts Required

•Replacement tires
•Suspension components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressures to ensure they are within manufacturer specifications.
2
Examine tires for visible damage, such as bulges or uneven wear patterns.
3
Perform a wheel balance check to identify if any wheels are out of balance.
4
Inspect suspension components (shocks, struts, bushings) for signs of wear or damage.
5
Check for proper alignment of the front and rear wheels.
6
Test drive the vehicle to replicate the shaking and confirm conditions under which it occurs.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.

2. Tire Pressure Check

Use a tire pressure gauge to measure the pressure in all four tires.
Adjust tire pressures to the recommended levels as specified in the owner's manual.

3. Tire Inspection and Replacement (if necessary)

Visually inspect each tire for damage such as cuts, bulges, or foreign objects.
If any tire is damaged or excessively worn, remove the wheel using a socket set and replace it with a new tire.
Ensure new tires are properly mounted and inflated.

4. Wheel Balancing

If the tires are in good condition, take the vehicle to a professional for wheel balancing.
Use a wheel balancer to identify heavy spots and add weights as necessary to balance the wheels.

5. Suspension and Alignment Check

Inspect all suspension components for wear, including control arms, bushings, and shock absorbers.
Replace any worn or damaged components with OEM parts.
After replacing components, perform a four-wheel alignment using an alignment machine to ensure proper angles.