how to reset the tire pressure light on Tesla Model 3 Original (2017-2023)?

Tesla Model 3 Highland (2024-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

3 min read

406 words

Problem Statement

Learn how to reset the tire pressure light on your Tesla Model 3 (2017-2023). Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is stationary while performing the reset process.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible fluctuations in tire pressure readings
•Reduced driving range due to under-inflated tires
•Warning message on the touchscreen display regarding tire pressure

Diagnostic Steps

1
Verify the current tire pressures using a tire pressure gauge.
2
Compare the readings to the recommended tire pressures listed on the driver's side door jamb.
3
Inflate or deflate tires to the correct pressures if necessary.
4
Check for any visible tire damage or leaks that may affect pressure.
5
Inspect the tire pressure monitoring system (TPMS) sensors if the light remains illuminated after correcting tire pressures.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None required for reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify the current tire pressures using a tire pressure gauge.
2
Compare the readings to the recommended tire pressures listed on the driver's side door jamb.
3
Inflate or deflate tires to the correct pressures if necessary.
4
Check for any visible tire damage or leaks that may affect pressure.
5
Inspect the tire pressure monitoring system (TPMS) sensors if the light remains illuminated after correcting tire pressures.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off all electrical systems to avoid any interference during the reset process.
Have the vehicle key fob or mobile app handy to access the vehicle functions.

2. Accessing the Tire Pressure Settings

Enter the Tesla Model 3 and power on the vehicle.
Navigate to the 'Controls' menu on the touchscreen.
Tap on 'Service', then select 'Tire Pressure'.

3. Resetting the TPMS

Once in the Tire Pressure menu, look for an option to 'Reset' or 'Calibrate' the tire pressure monitoring system.
Confirm the reset when prompted on the screen.
The vehicle will then recalibrate the tire pressure monitoring system based on the current readings.

4. Confirmation

After resetting, check the dashboard to ensure the tire pressure warning light is off.
Drive the vehicle for a short distance to allow the system to update and confirm that the light remains off.