how to fix Tesla Model 3 Original (2017-2023) tire pressure monitoring issues

Tesla Model 3 Highland (2024-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

520 words

Problem Statement

Learn how to diagnose and fix tire pressure monitoring issues in Tesla Model 3 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working on tires.
•Disconnect the battery before replacing any electronic components to prevent electrical shorts.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inconsistent tire pressure readings displayed
•No tire pressure data available for certain wheels
•Frequent alerts or notifications regarding low tire pressure
•Tire pressure data not updating after tire rotation or changes

Diagnostic Steps

1
Scan the vehicle for error codes using a compatible OBD-II scanner.
2
Check the tire pressures manually using a reliable tire pressure gauge.
3
Verify the TPMS sensors are functioning by inspecting for visible damage or corrosion.
4
Test the battery level of each TPMS sensor, if applicable.
5
Perform a reset of the TPMS through the vehicle's settings.
6
Inspect the wheel and tire assemblies for any aftermarket modifications that may interfere with TPMS function.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•TPMS sensor tool

Parts Required

•TPMS sensors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle for error codes using a compatible OBD-II scanner.
2
Check the tire pressures manually using a reliable tire pressure gauge.
3
Verify the TPMS sensors are functioning by inspecting for visible damage or corrosion.
4
Test the battery level of each TPMS sensor, if applicable.
5
Perform a reset of the TPMS through the vehicle's settings.
6
Inspect the wheel and tire assemblies for any aftermarket modifications that may interfere with TPMS function.

Solution

1. Preparation

Tools Required: OBD-II scanner, tire pressure gauge, TPMS sensor tool (if needed).
Ensure the vehicle is parked on a level surface and that the tires are at the recommended pressure.

2. Check Tire Pressures

Use a tire pressure gauge to check the pressure in all four tires.
Inflate or deflate tires to match the recommended pressure indicated on the driver’s door jamb label.

3. Inspect TPMS Sensors

Remove the tire from the wheel if needed to access the TPMS sensor.
Inspect the sensor for physical damage or corrosion.
If damaged, proceed to replace the sensor.

4. Replace TPMS Sensors (if necessary)

Remove the tire from the wheel using a tire changer.
Unscrew the old TPMS sensor from the valve stem.
Install the new TPMS sensor, ensuring it is securely fastened.
Reassemble the tire onto the wheel and balance if needed.

5. Reset TPMS

Use the vehicle's interface to navigate to the TPMS settings.
Select the option to reset or recalibrate the TPMS.
Confirm the reset and allow the system to re-evaluate the tire pressures.

6. Test Drive

Drive the vehicle for at least 10-15 minutes at various speeds to allow the system to recalibrate and recognize the tire pressures.