my Tesla Outback's remote key fob is not working, what can I do?

Subaru Outback 6th Generation (2020-2024)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

438 words

Problem Statement

Learn how to troubleshoot and fix a non-working key fob for your Tesla Outback. Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Be cautious when working with small components to avoid losing parts.

Symptoms

•Key fob not responding to button presses
•Indicator light on the key fob not illuminating
•Failure to unlock or lock the doors remotely
•Car not recognizing the key fob when attempting to start
•Possible low battery warning on the vehicle's dashboard

Diagnostic Steps

1
Check the key fob battery level and replace if necessary.
2
Verify that the key fob is within the operational range of the vehicle.
3
Inspect the key fob for physical damage or water exposure.
4
Reprogram the key fob using the vehicle's onboard settings.
5
Scan for error codes related to the keyless entry system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small Phillips screwdriver
•OBD-II scanner

Parts Required

•Replacement key fob battery (CR2032 or equivalent)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the key fob battery level and replace if necessary.
2
Verify that the key fob is within the operational range of the vehicle.
3
Inspect the key fob for physical damage or water exposure.
4
Reprogram the key fob using the vehicle's onboard settings.
5
Scan for error codes related to the keyless entry system using an OBD-II scanner.

Solution

1. Battery Replacement

Tools Required: Small Phillips screwdriver, replacement battery (CR2032 or equivalent).
Open the key fob using the screwdriver to access the battery compartment.
Remove the old battery and replace it with the new one, ensuring the positive (+) side is facing the correct direction.
Reassemble the key fob and test its functionality.

2. Reprogramming the Key Fob

Tools Required: None specific, but vehicle manual may be helpful.
Sit in the driver's seat with all doors closed and the vehicle in the "On" position (not running).
Follow the vehicle manual instructions for programming a new key fob.
Typically, this involves pressing a specific sequence of buttons on the key fob and the vehicle’s controls.
Confirm successful programming by testing the key fob.

3. Inspecting the Key Fob

Tools Required: None.
Examine the key fob for any visible signs of damage, such as cracks or water ingress.
If damage is found, consider replacing the entire key fob.