how to fix transmission codes P0701 to P0799 in Tesla Outback 6th Generation (2020-2024)

Subaru Outback 6th Generation (2020-2024)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

Error Code: P0701-P0799

4 min read

608 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission codes P0701-P0799 in Tesla Outback 6th Generation. Step-by-step guide with symptoms, diagnostics, and repair instructions.

Error Code

P0701-P0799

Affected Component

Transmission

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine and transmission to cool before servicing.

Symptoms

•Check engine light illuminated
•Erratic shifting or difficulty in shifting gears
•Transmission slipping or harsh engagement
•Poor acceleration or loss of power
•Transmission overheating
•Unusual noises from the transmission area

Diagnostic Steps

1
Scan the vehicle's OBD-II system for transmission-related error codes using a compatible scanner.
2
Inspect the transmission fluid level and condition, checking for contamination or burnt smell.
3
Examine the wiring and connectors leading to the TCM and transmission sensors for signs of damage or corrosion.
4
Test the TCM for proper operation using a multimeter to check voltage and continuity.
5
Inspect the input and output speed sensors for functionality and proper installation.
6
Check for any TCM software updates or recalls specific to the model year.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Screwdrivers

Parts Required

•Transmission fluid (manufacturer-approved)
•TCM (if replacement is necessary)
•Input/output speed sensors (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for transmission-related error codes using a compatible scanner.
2
Inspect the transmission fluid level and condition, checking for contamination or burnt smell.
3
Examine the wiring and connectors leading to the TCM and transmission sensors for signs of damage or corrosion.
4
Test the TCM for proper operation using a multimeter to check voltage and continuity.
5
Inspect the input and output speed sensors for functionality and proper installation.
6
Check for any TCM software updates or recalls specific to the model year.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle's battery to ensure safety while working on the electrical components.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Torque wrench
Screwdrivers

2. Fluid Inspection and Replacement

Check the transmission fluid level using the dipstick.
If low, add the manufacturer-recommended transmission fluid.
If the fluid is contaminated or burnt, drain the transmission fluid:
1. Place a drain pan under the transmission.
2. Remove the drain plug and allow the fluid to fully drain.
3. Reinstall the drain plug and torque to manufacturer specifications.
4. Refill with new, manufacturer-approved transmission fluid through the dipstick tube.

3. Wiring and Connector Inspection

Visually inspect the wiring harness and connectors for wear or damage.
Clean connectors with electrical contact cleaner and reseat them.
Repair or replace any damaged wiring or connectors as needed.

4. TCM Testing and Replacement

Using a multimeter, check the TCM for proper voltage and continuity.
If the TCM is faulty, remove it:
1. Disconnect the electrical connectors from the TCM.
2. Remove the mounting bolts and take out the TCM.
Install a new or refurbished TCM:
1. Position the new TCM in place.
2. Secure it with bolts and reconnect the electrical connectors.

5. Sensor Inspection and Replacement

Inspect the input and output speed sensors:
1. Locate the sensors on the transmission.
2. Remove the sensors by unscrewing them.
Test the sensors with a multimeter for resistance and proper operation.
Replace sensors if they are faulty:
1. Install new sensors in their respective locations.
2. Torque to manufacturer specifications.