how to fix P0746 code in Tesla Outback 6th Generation (2020-2024)

Subaru Outback 6th Generation (2020-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0746

3 min read

504 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0746 transmission issues in Tesla Outback (2020-2024). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0746

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening the transmission or checking fluid levels.

Symptoms

•Check engine light illuminated
•Erratic or harsh shifting
•Transmission overheating
•Decreased fuel efficiency
•Unusual transmission noises

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0746 and check for any related codes.
2
Inspect transmission fluid level and condition; look for signs of contamination or burnt fluid.
3
Test the transmission fluid temperature sensor's resistance using a multimeter.
4
Check for any wiring issues, such as frayed wires or loose connections, related to the transmission control module.
5
Inspect the transmission control module for faults or software updates.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Fluid pump or drain plug tool

Parts Required

•Transmission fluid (manufacturer-approved)
•Transmission fluid temperature sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0746 and check for any related codes.
2
Inspect transmission fluid level and condition; look for signs of contamination or burnt fluid.
3
Test the transmission fluid temperature sensor's resistance using a multimeter.
4
Check for any wiring issues, such as frayed wires or loose connections, related to the transmission control module.
5
Inspect the transmission control module for faults or software updates.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical shock.

2. Fluid Inspection and Replacement

Sub-step 1: Remove the transmission fluid dipstick and check the fluid level; add fluid if low (use manufacturer-approved fluid).
Sub-step 2: If the fluid is discolored or has a burnt smell, drain the old fluid using a fluid pump or drain plug.
Sub-step 3: Replace with fresh transmission fluid as per the manufacturer's specifications.

3. Replace Transmission Fluid Temperature Sensor

Sub-step 1: Locate the transmission fluid temperature sensor (usually found on the transmission body).
Sub-step 2: Disconnect the wiring connector from the sensor.
Sub-step 3: Remove the sensor using a socket wrench (check for torque specifications in the service manual).
Sub-step 4: Install the new sensor and reconnect the wiring harness.

4. Check and Repair Wiring

Sub-step 1: Inspect the wiring harness connected to the transmission for any signs of damage or corrosion.
Sub-step 2: Repair or replace any damaged wires, ensuring secure connections.

5. Reconnect Battery and Clear Codes

Sub-step 1: Reconnect the battery terminals securely.
Sub-step 2: Use the OBD-II scanner to clear the P0746 code and any related codes.