how to deal with a dead key fob on my Tesla Outback 6th Generation (2020-2024)?

Subaru Outback 6th Generation (2020-2024)

Error Codes

30-60 minutes

Time

medium

Difficulty

medium

Severity

3 min read

440 words

Problem Statement

Learn how to troubleshoot and replace the battery in a dead key fob for Tesla Outback 6th Generation (2020-2024). Step-by-step guide included.

Affected Component

Electrical

Estimated Time

30-60 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and turned off before working on the key fob.

Symptoms

•Key fob not responding to button presses
•Vehicle does not unlock or start
•Indicator light on key fob does not illuminate
•Key fob detected but shows low battery warning
•Car does not recognize key fob proximity

Diagnostic Steps

1
Check the key fob battery level using a multimeter or battery tester.
2
Replace the key fob battery with a new one and test functionality.
3
Attempt to unlock the vehicle using the mobile app.
4
Verify if the vehicle can be unlocked with the physical key blade (if applicable).
5
Inspect for any physical damage to the key fob.
6
Check for software updates or resets on the car’s interface.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small screwdriver
•Flathead screwdriver
•Multimeter or battery tester

Parts Required

•CR2032 key fob battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the key fob battery level using a multimeter or battery tester.
2
Replace the key fob battery with a new one and test functionality.
3
Attempt to unlock the vehicle using the mobile app.
4
Verify if the vehicle can be unlocked with the physical key blade (if applicable).
5
Inspect for any physical damage to the key fob.
6
Check for software updates or resets on the car’s interface.

Solution

1. Preparation

Tools Required: Small screwdriver, flathead screwdriver, new key fob battery (typically CR2032).
Allow the vehicle to enter sleep mode before starting work on the key fob.

2. Open Key Fob

Use a small flathead screwdriver to gently pry open the key fob casing, starting from a corner.
Carefully separate the top and bottom halves to avoid damaging the clips.

3. Replace Battery

Remove the old battery from its compartment, noting the orientation of the positive and negative sides.
Insert the new battery (CR2032) into the compartment, ensuring the correct orientation is followed.

4. Reassemble Key Fob

Align the two halves of the key fob and press them together until they click securely.
Ensure there are no gaps between the two halves.

5. Test Key Fob

Stand near the vehicle and press any button on the key fob to check if it unlocks the doors or starts the vehicle.
If necessary, reprogram the key fob using the vehicle’s settings menu.