how to reset the maintenance light on my Tesla Outback 5th Generation (2015-2019)?

Subaru Outback 5th Generation (2015-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

353 words

Problem Statement

Learn how to reset the maintenance light on your Tesla Outback (2015-2019). Step-by-step guide for a quick and easy reset process.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode while performing the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle running normally without performance issues

Diagnostic Steps

1
Place the vehicle in 'Park' mode.
2
Turn the ignition to the 'On' position without starting the engine.
3
Access the vehicle settings via the touchscreen display.
4
Navigate to the 'Service' or 'Maintenance' menu.
5
Select the option to reset or clear the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle key fob or key inside the vehicle.

2. Turn on the Ignition

Insert the key fob into the ignition slot or press the brake pedal to wake up the system.
Press the "Start" button to turn the ignition to the "On" position without starting the engine.

Locate the touchscreen interface on the dashboard.
Tap on the "Settings" icon.

Scroll through the options and tap on "Service" or "Maintenance."
Look for the option labeled “Reset Maintenance Light” or similar.

5. Confirm the Reset

Select the "Reset" option.
Confirm any prompts to finalize the reset process.

6. Verify the Reset

After completing the reset, turn off the ignition.
Start the engine and check if the maintenance light has turned off.