FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Renault Clio V show P0135 error code - Renault Clio
Home/Cars/Renault/Clio/V (2019-Present)/why does my Renault Clio V show P0135 error code

why does my Renault Clio V show P0135 error code

Renault Clio V (2019-Present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0135
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
523 words

Problem Statement

Learn how to diagnose and fix P0135 oxygen sensor circuit issue in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0135
Affected Component
Exhaust System
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the engine to cool before working on exhaust components.

Symptoms

  • •Check engine light illuminated
  • •Poor fuel economy
  • •Rough idle
  • •Engine stalling during acceleration
  • •Increased emissions
  • •Failure to pass emissions test

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Oxygen sensor socket
  • •Wrench set
  • •Torque wrench
  • •Dielectric grease

Parts Required

  • •Upstream oxygen sensor
  • •Related fuse (if blown)

Additional Information

Error Code
P0135
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and Repair Wiring
  • Remove any protective coverings to access the wiring of the upstream oxygen sensor.
  • Check for any frayed, broken, or corroded wires.
  • Repair or replace any damaged wiring as necessary, ensuring a secure connection.
3. Replace Oxygen Sensor
  • Tools Required: O2 sensor socket, wrench set, torque wrench, dielectric grease.
  • Locate the upstream oxygen sensor on the exhaust manifold.
  • Disconnect the electrical connector from the oxygen sensor.
  • Use the O2 sensor socket to unscrew the old sensor from the exhaust.
  • Apply dielectric grease to the threads of the new sensor.
  • Install the new oxygen sensor and tighten it to the manufacturer's specified torque (typically around 30 Nm).
  • Reconnect the electrical connector.
4. Check and Replace Fuse (if necessary)
  • Locate the fuse box and find the fuse for the oxygen sensor heater circuit.
  • Use a multimeter or visual inspection to determine if the fuse is blown.
  • Replace the fuse with one of the same amperage if necessary.
5. Reconnect Battery and Clear Codes
  • Reconnect the battery terminals.
  • Use the OBD-II scanner to clear the P0135 code from the system.