why does my Renault Clio V (2019-Present) shake when I brake

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

507 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Allow the brake components to cool before touching them after driving.

Symptoms

•Steering wheel vibrates when braking
•Vehicle shakes during braking
•Uneven brake wear
•Check brake warning light illuminated
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotor thickness and surface for warping or scoring.
2
Check brake pad condition for uneven wear or damage.
3
Examine the brake calipers for proper operation and sticking.
4
Inspect wheel bearings for play or wear.
5
Verify tire balance and alignment.
6
Check for any suspension component issues such as worn bushings or tie rods.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Micrometer or dial indicator

Parts Required

•Brake rotors (if warped or below specification)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotor thickness and surface for warping or scoring.
2
Check brake pad condition for uneven wear or damage.
3
Examine the brake calipers for proper operation and sticking.
4
Inspect wheel bearings for play or wear.
5
Verify tire balance and alignment.
6
Check for any suspension component issues such as worn bushings or tie rods.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal for safety.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts.
Raise the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

Inspect Brake Rotors:
- Measure rotor thickness with a micrometer; replace if below minimum specification.
- Check for warping using a dial indicator or visual inspection.
Replace Rotors (if necessary):
1. Remove caliper bolts using a socket set.
2. Carefully slide the caliper off the rotor.
3. Remove the rotor by unscrewing any retaining screws and pulling it off the hub.
4. Install the new rotor and torque to specifications (typically 15-25 Nm).
Inspect Brake Pads:
- Check the thickness; replace if less than 3mm.
Replace Brake Pads (if necessary):
1. Remove the caliper bracket bolts.
2. Slide out the old brake pads.
3. Lubricate the caliper slide pins and install new pads.
4. Reassemble the caliper and torque bolts to specifications (typically 25-35 Nm).

4. Reinstall Wheel

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts in a star pattern to specifications (typically 90-100 Nm).

5. Final Checks

Reconnect the negative battery terminal.
Test the brake system by pressing the brake pedal before driving.