why does my Renault Clio V (2019-Present) shake when I brake

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

491 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibrations in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted before working underneath it.
•Allow brakes to cool before handling any components to avoid burns.

Symptoms

•Steering wheel shakes during braking
•Vibration felt through the brake pedal
•Uneven wear on brake pads or rotors
•Pulsation in the brake pedal
•Noise such as grinding or squeaking during braking

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for thickness and signs of uneven wear.
3
Examine suspension components (e.g., control arms, bushings) for damage or play.
4
Verify wheel balance and alignment using a wheel balancer and alignment equipment.
5
Check brake fluid level and condition for contamination.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Dial indicator
•Socket set
•Torque wrench
•Brake cleaner
•Jack and jack stands

Parts Required

•Brake rotors
•Brake pads
•Suspension components (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for thickness and signs of uneven wear.
3
Examine suspension components (e.g., control arms, bushings) for damage or play.
4
Verify wheel balance and alignment using a wheel balancer and alignment equipment.
5
Check brake fluid level and condition for contamination.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and securely lift it using a jack and jack stands.
Disconnect the battery if electrical components are being worked on.

2. Inspect and Replace Brake Rotors

Inspection: Remove the wheel and measure the brake rotor thickness and runout with a dial indicator.
Replacement: If warped, remove the caliper by unbolting it and hanging it with a bungee cord. Remove the rotor by unscrewing the retaining screws (if applicable).
Installation: Install new rotors, ensuring they are clean and free of oil. Torque rotor retaining screws to manufacturer specifications.

3. Inspect and Replace Brake Pads

Remove the caliper bracket to access the brake pads.
Check for uneven wear; replace pads if worn down below the minimum thickness.
Installation: Install new pads, ensuring proper orientation and lubrication of backing plates. Reassemble the caliper and torque bolts to specifications.

4. Inspect and Repair Suspension Components

Visually inspect suspension parts for cracks, excessive wear, or play.
Repair: Replace any damaged components, such as control arms or bushings, using appropriate socket sets and torque wrench.

5. Wheel Balance and Alignment

Remove the wheel and tire assembly and take it to a tire shop for balancing.
If alignment is off, adjust using an alignment machine according to manufacturer specifications.