why does my Renault Clio V (2019-Present) shake when braking

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

515 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover how to diagnose and fix shaking when braking in Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostics, and repair tips.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always securely support the vehicle on jack stands before working underneath it.
•Allow the brakes to cool before inspecting or handling components.

Symptoms

•Steering wheel vibrations when braking
•Pulsating brake pedal feel
•Shaking in the front or rear of the vehicle
•Uneven brake wear on pads or rotors
•Increased stopping distance
•Noise from the brakes during application

Diagnostic Steps

1
Inspect brake rotors for warping or uneven surfaces using a dial indicator.
2
Check brake pad condition for wear and thickness.
3
Examine wheel alignment and tire balance using alignment and balancing equipment.
4
Inspect suspension components for wear or damage, including control arms and bushings.
5
Verify brake caliper operation by checking for sticking or seized calipers.
6
Scan for any error codes that might indicate issues with the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Dial indicator
•Torque wrench
•Jack and jack stands
•Brake cleaner
•Safety glasses
•Gloves

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)
•Brake calipers (if seized)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven surfaces using a dial indicator.
2
Check brake pad condition for wear and thickness.
3
Examine wheel alignment and tire balance using alignment and balancing equipment.
4
Inspect suspension components for wear or damage, including control arms and bushings.
5
Verify brake caliper operation by checking for sticking or seized calipers.
6
Scan for any error codes that might indicate issues with the braking system.

Solution

1. Preparation

Gather tools and parts needed.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves.

2. Remove the Wheel

Loosen lug nuts slightly while the vehicle is on the ground.
Raise the vehicle with a jack and secure it with jack stands.
Completely remove lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Inspect Brake Rotors:
- Check for warping using a dial indicator.
- If warped, remove the rotor using a socket set and replace with a new rotor.
Inspect Brake Pads:
- Measure the thickness of the pads.
- If worn below manufacturer specifications, replace with new pads.
Caliper Inspection:
- Check caliper operation. If seized, remove the caliper and replace or rebuild it.

4. Align and Balance Tires

Take the vehicle to a professional for wheel alignment and tire balancing.
Ensure that the tires are properly inflated and in good condition.

5. Reassemble and Test

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque lug nuts to the manufacturer’s specifications.
Test drive the vehicle to ensure the shaking has been resolved.