how to fix P0606 code in Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0606

3 min read

488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0606 ECM issues in Renault Clio V. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0606

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.
•Allow the engine to cool before handling any components to avoid burns.

Symptoms

•Check engine light illuminated
•Engine stalling or misfiring
•Rough idle or poor throttle response
•Loss of power during acceleration
•Increased fuel consumption
•Unusual engine noises

Diagnostic Steps

1
Scan the vehicle’s computer using an OBD-II scanner to confirm the P0606 code and check for any related codes.
2
Inspect the battery voltage and connections to ensure they are secure and providing adequate voltage.
3
Check the wiring harness and connectors leading to the ECM for signs of damage, corrosion, or loose connections.
4
Perform a visual inspection of the ECM for physical damage or signs of overheating.
5
Clear the fault codes and take the vehicle for a test drive to see if the code reappears.
6
If the code returns, perform a continuity test on the ECM power and ground circuits.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Screwdrivers

Parts Required

•Engine Control Module (if replacement is necessary)
•Wiring harness or connectors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s computer using an OBD-II scanner to confirm the P0606 code and check for any related codes.
2
Inspect the battery voltage and connections to ensure they are secure and providing adequate voltage.
3
Check the wiring harness and connectors leading to the ECM for signs of damage, corrosion, or loose connections.
4
Perform a visual inspection of the ECM for physical damage or signs of overheating.
5
Clear the fault codes and take the vehicle for a test drive to see if the code reappears.
6
If the code returns, perform a continuity test on the ECM power and ground circuits.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to prevent electrical shorts.
Ensure the vehicle is on a flat surface with the engine off.

2. Inspect the Wiring and Connectors

Remove the engine cover if necessary.
Carefully disconnect the ECM connector.
Inspect the pins and connectors for corrosion or damage.
Use a multimeter to check for continuity in the wiring to the ECM.
Repair or replace any damaged wiring or connectors.

3. Replace the ECM (if necessary)

If the ECM is confirmed to be faulty:
1. Remove the old ECM by unscrewing any retaining bolts and disconnecting the wiring harness.
2. Install the new ECM by connecting the wiring harness and securing it with bolts.
3. Ensure all connections are tight and secure.

4. Reconnect Battery and Test

Reconnect the battery.
Start the engine and check for any warning lights.
Monitor engine performance and check for the reappearance of the P0606 code.