how to fix leaking struts on Renault Clio V (2019-Present)

Renault Clio V (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

541 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix leaking struts on Renault Clio V (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on the suspension.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Fluid leakage around the struts
•Increased bouncing or instability while driving
•Noisy suspension during bumps or turns
•Uneven tire wear
•Poor handling or cornering performance

Diagnostic Steps

1
Inspect the struts visually for signs of fluid leakage.
2
Check for any physical damage or dents on the strut housing.
3
Test the strut performance by pushing down on the vehicle and observing the rebound.
4
Verify the vehicle's alignment and check for uneven tire wear.
5
Check the surrounding suspension components for any wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Lug wrench
•Jack and jack stands
•Spring compressor

Parts Required

•New struts (front or rear depending on the leak)
•New strut mounts (if necessary)
•New coil springs (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the struts visually for signs of fluid leakage.
2
Check for any physical damage or dents on the strut housing.
3
Test the strut performance by pushing down on the vehicle and observing the rebound.
4
Verify the vehicle's alignment and check for uneven tire wear.
5
Check the surrounding suspension components for any wear or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure vehicle is parked on a level surface.
Raise the vehicle safely using a jack and secure it with jack stands.
Disconnect the battery to prevent any electrical issues.

2. Remove the Wheel

Tools Required: Socket set, lug wrench
Sub-steps:
1. Loosen the lug nuts on the front wheel using a lug wrench.
2. Lift the vehicle using a jack and secure it on jack stands.
3. Remove the lug nuts completely and take off the wheel.

3. Remove the Strut

Tools Required: Torque wrench, socket set, spring compressor
Sub-steps:
1. Disconnect the strut from the steering knuckle by removing the lower mounting bolts.
2. Remove the upper strut mount nuts located under the hood.
3. Use a spring compressor to safely compress the coil spring on the strut.
4. Remove the coil spring from the strut assembly.

4. Replace the Strut

Tools Required: Torque wrench, socket set
Sub-steps:
1. Install the new strut in place of the old one.
2. Reattach the upper strut mount nuts and tighten to manufacturer's specifications.
3. Reconnect the lower mounting bolts to the steering knuckle and torque them to spec.
4. Ensure all components are reattached correctly and securely.

5. Reassemble the Vehicle

Tools Required: Socket set, torque wrench
Sub-steps:
1. Place the coil spring back onto the new strut and release the spring compressor.
2. Reinstall the wheel onto the hub and hand-tighten the lug nuts.
3. Lower the vehicle back to the ground and torque the lug nuts to the manufacturer's specifications.