why does my Ram 1500 DT (2019-Present) have rough acceleration after 60 mph

Ram 1500 DT (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

500 words

Problem Statement

Learn how to diagnose and fix rough acceleration in 2019 Ram 1500 DT. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before inspecting the fuel system.

Symptoms

•Engine stuttering during acceleration
•Increased engine vibration at higher speeds
•Loss of power or hesitation when accelerating
•Potential check engine light illuminated
•Poor fuel economy at higher speeds

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes.
2
Inspect the fuel system for any leaks or blockages.
3
Check the spark plugs for wear or fouling.
4
Examine the air intake system for obstructions or leaks.
5
Test the ignition coils for proper function.
6
Assess the transmission fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Spark plug socket
•Ratchet set
•Fuel line wrench
•Torque wrench

Parts Required

•Spark plugs
•Fuel filter
•Air filter
•Transmission fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes.
2
Inspect the fuel system for any leaks or blockages.
3
Check the spark plugs for wear or fouling.
4
Examine the air intake system for obstructions or leaks.
5
Test the ignition coils for proper function.
6
Assess the transmission fluid level and condition.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts.

2. Scan for Error Codes

Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs).
Record any codes found and proceed with troubleshooting based on those codes.

3. Inspect and Replace Spark Plugs

Remove the ignition coils to access the spark plugs.
Use a spark plug socket and ratchet to remove the spark plugs.
Inspect spark plugs for signs of wear (e.g., discoloration, gap wear).
Replace with new spark plugs, ensuring they are gapped to manufacturer specifications (typically around 0.040 inches).
Reinstall ignition coils.

4. Check Fuel and Air Systems

Inspect the fuel lines for leaks and ensure there are no blockages in the fuel filter.
Replace the fuel filter if it’s clogged.
Check the air filter and replace if it’s dirty or clogged.
Inspect the intake manifold for any vacuum leaks.

5. Inspect Transmission Fluid

Remove the transmission dipstick and check the fluid level and condition (should be a clear red).
If low, add the appropriate type of transmission fluid as specified in the owner's manual.
If the fluid is dark or burnt, consider a transmission fluid change.