how to reset the transmission fluid light in my Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

0.5-1 hour

Time

medium

Difficulty

medium

Severity

3 min read

466 words

Problem Statement

Learn how to reset the transmission fluid light in your 2019-present Ram 1500 DT. Step-by-step guide with diagnostic steps and necessary tools.

Affected Component

Transmission

Estimated Time

0.5-1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a level surface and the engine is cool before checking the transmission fluid level.

Symptoms

•Transmission fluid light illuminated on the dashboard
•Possible rough shifting during gear changes
•Engine performance issues due to low fluid levels
•Increased engine temperature if the fluid is low
•Unusual transmission noises (grinding or whining)

Diagnostic Steps

1
Check the owner’s manual for specific instructions on the transmission fluid light reset procedure for the Ram 1500 DT.
2
Ensure that the transmission fluid level is adequate and the fluid condition is acceptable (not burnt or contaminated).
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) that may indicate other issues.
4
Inspect the transmission fluid for leaks or signs of contamination.
5
If necessary, perform a transmission fluid change before resetting the light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle key
•Socket set

Parts Required

•Transmission fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the owner’s manual for specific instructions on the transmission fluid light reset procedure for the Ram 1500 DT.
2
Ensure that the transmission fluid level is adequate and the fluid condition is acceptable (not burnt or contaminated).
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) that may indicate other issues.
4
Inspect the transmission fluid for leaks or signs of contamination.
5
If necessary, perform a transmission fluid change before resetting the light.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner, vehicle key, and possibly a socket set for any required fluid level adjustments.
Ensure the vehicle is in a safe, well-ventilated area and parked on a level surface.

2. Resetting the Transmission Fluid Light

Start the Vehicle: Insert the key into the ignition and turn to the "On" position without starting the engine.
Access the OBD-II Scanner: Connect the OBD-II scanner to the vehicle’s diagnostic port, usually located under the dashboard near the steering column.
Navigate to the Transmission Section: Using the scanner, navigate to the transmission control module settings.
Select the Reset Function: Look for an option to reset the transmission fluid light or clear the codes and select it.
Confirm Reset: Follow the prompts on the scanner to confirm the reset. This may include turning the ignition off and then back to the "On" position to finalize the reset.
Disconnect the Scanner: After the reset is confirmed, safely disconnect the OBD-II scanner from the vehicle.