how to reset the check engine light on Ram 1500 DT (2019-Present)

Ram 1500 DT (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

404 words

Problem Statement

Learn how to reset the check engine light on your 2019-present Ram 1500 DT. Step-by-step guide with diagnostic procedures and tips for prevention.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged while working on it.

Symptoms

•Check engine light illuminated
•Potential diagnostic trouble codes (DTCs) stored in the system
•No noticeable performance issues
•Possible temporary electrical glitches or sensor issues

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Document the trouble codes and any symptoms associated with them.
3
Check for any visible issues under the hood, such as loose connections or damaged wires.
4
Clear the codes using the OBD-II scanner and observe if the check engine light reappears after a short drive.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•None for resetting the light, but tools may be needed if repairs are required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Document the trouble codes and any symptoms associated with them.
3
Check for any visible issues under the hood, such as loose connections or damaged wires.
4
Clear the codes using the OBD-II scanner and observe if the check engine light reappears after a short drive.

Solution

1. Preparation

Gather tools: OBD-II scanner, vehicle owner’s manual.
Ensure the vehicle is parked on a level surface with the engine off for safety.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard near the driver's seat.
Plug the OBD-II scanner into the port.

3. Read and Clear Codes

Turn the ignition to the "ON" position without starting the engine.
Follow the scanner's prompts to read any stored diagnostic trouble codes (DTCs).
Document any codes for future reference or repair.
Select the option to clear or erase the codes.

4. Verify Reset

Turn off the ignition and disconnect the scanner.
Start the engine and observe if the check engine light remains off.

5. Test Drive

Drive the vehicle for a short distance to ensure the check engine light does not reappear and that the vehicle operates normally.