FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to address the ABS light on my Ram 1500 DT (2019-Present)? - Ram 1500
Home/Cars/Ram/1500/DT (2019-Present)/how to address the ABS light on my Ram 1500 DT (2019-Present)?

how to address the ABS light on my Ram 1500 DT (2019-Present)?

Ram 1500 DT (2019-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
502 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the ABS light issue on your 2019-Present Ram 1500 DT. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before working on brake components.

Symptoms

  • •ABS warning light illuminated on the dashboard
  • •Reduced braking performance or sensitivity
  • •Pulsation in the brake pedal during braking
  • •Increased stopping distance
  • •Possible traction control warning light may also be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Pliers
  • •Fuse pullers
  • •Soft brush or cloth

Parts Required

  • •ABS fuse (if blown)
  • •Wheel speed sensors (if damaged)
  • •ABS control module (if faulty)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent any electrical shorts.
2. Inspect and Clean Wheel Speed Sensors
  • Locate the wheel speed sensors at each wheel hub.
  • Remove any dirt or debris from the sensor area using a soft brush or cloth.
  • If sensors are damaged, replace them.
3. Check and Replace ABS Fuse
  • Locate the fuse box (usually under the dashboard or in the engine compartment).
  • Identify and remove the ABS fuse using fuse pullers or pliers.
  • Inspect the fuse for continuity; replace with a new fuse of the same amperage if blown.
4. Repair or Replace ABS Wiring
  • Visually inspect the ABS wiring harness for any signs of wear or damage.
  • If damaged, strip the wires and use heat-shrink connectors or electrical tape to insulate any repaired sections.
  • Replace any sections of wiring that are severely damaged.
5. Test the ABS Module
  • Reconnect the battery terminal.
  • Use the multimeter to check the ABS module input and output signals according to the specifications in the service manual.
  • If the module is faulty, replace it with a new ABS control unit.