how to reset the service light on Porsche Cayenne E3 (2018-Present)?

Porsche Cayenne E3 (2018-Present)

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

338 words

Problem Statement

Learn how to reset the service light on your Porsche Cayenne E3 (2018-present) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

Important safety information - read before proceeding

1
Turn the ignition key to the 'On' position without starting the engine.
2
Locate the trip reset button on the dashboard.
3
Press and hold the trip reset button until the service menu appears.
4
Use the touchscreen or buttons to navigate to the 'Service' or 'Maintenance' section.
5
Select the option to reset the service light or service interval.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Turn the ignition key to the 'On' position without starting the engine.
2
Locate the trip reset button on the dashboard.
3
Press and hold the trip reset button until the service menu appears.
4
Use the touchscreen or buttons to navigate to the 'Service' or 'Maintenance' section.
5
Select the option to reset the service light or service interval.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the ignition is in the "On" position.
Have the owner's manual handy for reference if needed.

Sub-step 1: Press and hold the trip reset button (located on the instrument cluster) until the menu appears.
Sub-step 2: Use the steering wheel controls or the dashboard menu to navigate to the "Service" menu.

3. Reset the Service Light

Sub-step 1: Once in the "Service" menu, locate the "Reset" option for the service light.
Sub-step 2: Confirm the reset action when prompted, usually by selecting "Yes" or "OK".
Sub-step 3: Turn off the ignition and wait a few seconds before restarting the vehicle.