how to reset the oil change light on my Porsche Cayenne E3 (2018-Present)

Porsche Cayenne E3 (2018-Present)

less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

357 words

Problem Statement

Learn how to reset the oil change light on your Porsche Cayenne E3 (2018-Present) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

less than 10 minutes

Important safety information - read before proceeding

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Check the oil change light to see if it has reset.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Check the oil change light to see if it has reset.

Solution

1. Preparation

2. Resetting the Oil Change Light

Insert Key: Place the key in the ignition or have the key fob ready.
Turn Ignition On: Turn the ignition key to the “On” position without starting the engine.
Press Accelerator: Fully depress the accelerator pedal three times within 10 seconds. Ensure that you are pressing it all the way down for it to register.
Check Oil Change Light: After the accelerator pedal is pressed, turn the ignition off and then back on to verify the oil change light has extinguished.