FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the P0496 code in my Mercedes-Benz E-Class W212 (2009-2016)? - Mercedes-Benz GLC
Home/Cars/Mercedes-Benz/GLC/X253 (2015-2023)/How do I fix the P0496 code in my Mercedes-Benz E-Class W212 (2009-2016)?

How do I fix the P0496 code in my Mercedes-Benz E-Class W212 (2009-2016)?

Mercedes-Benz GLC X253 (2015-2023)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSolution
ProblemSolution
3 min read
577 words

Problem Statement

### Fixing P0496 Code in a Mercedes-Benz E-Class W212 (2009-2016)

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Additional Information

Difficulty
medium
Severity
medium

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing P0496 Code in a Mercedes-Benz E-Class W212 (2009-2016)

The P0496 code indicates a problem with the evaporative emission control system (EVAP) and specifically points to "Evaporative Emission System High Purge Flow." This can lead to increased emissions, and it may affect vehicle performance. Below, I’ll provide detailed steps for diagnosing and fixing this code.

Symptoms

  • Check Engine Light (CEL) illuminated.
  • Possible rough idling or stalling.
  • Decreased fuel efficiency.
  • Emissions test failure.
Diagnostic Steps

  1. Confirm the Code:

    • Use an OBD-II scanner to confirm the presence of the P0496 code.
    • Check for any additional codes that may provide more context.

  2. Visual Inspection:

    • Inspect the EVAP system for any visible leaks or damage.
    • Check the condition of the EVAP hoses, canister, and purge valve.

  3. Purge Valve Test:

    • The purge valve is often the source of the P0496 code. It can fail open, allowing too much vapor to enter the engine.
    • Disconnect the electrical connector from the purge valve.
    • Use a multimeter to check the resistance across the purge valve terminals. It should be within the manufacturer’s specifications (typically around 20-30 ohms).

  4. Functional Testing:

    • While the engine is running, apply voltage directly to the purge valve to see if it opens and closes properly.
    • Listen for a clicking sound indicating it is functioning.

  5. Smoke Test:

    • If no issues are found with the purge valve, perform a smoke test on the EVAP system to identify any leaks. Use a smoke machine to introduce smoke into the system and look for escaping smoke.

  6. Check the Fuel Cap:

    • Ensure the fuel cap is tight and in good condition. A faulty cap can cause a vacuum leak in the EVAP system.

  7. Inspect the Charcoal Canister:

    • Check for cracks or damage in the charcoal canister. A damaged canister can cause improper operation of the EVAP system.
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Smoke Machine (for leak detection)
  • Basic hand tools (sockets, wrenches)
  • Replacement parts (purge valve, fuel cap, or charcoal canister if needed)
Repair Instructions

  1. Replace the Purge Valve:

    • If the purge valve is faulty, proceed with replacement.
    • Steps:
      • Disconnect the electrical connector and hoses from the old purge valve.
      • Remove the mounting bolts using a socket.
      • Install the new purge valve in reverse order.
      • Reconnect hoses and electrical connector.

  2. Replace the Charcoal Canister (if necessary):

    • If the canister is leaking, it must be replaced.
    • Steps:
      • Remove any mounting hardware securing the canister.
      • Disconnect any associated hoses and electrical connectors.
      • Install the new canister and reconnect all hoses and connectors.

  3. Clear the Code:

    • After repairs, use the OBD-II scanner to clear the P0496 code.
    • Take the vehicle for a test drive to ensure the CEL does not return.

  4. Monitor for Recurrence:

    • After repairs, monitor the vehicle for any symptoms or reappearance of the code.
Final Notes

If the check engine light returns after performing these repairs, further diagnostics may be necessary. This could include checking the wiring and connectors related to the EVAP system, inspecting the fuel system for leaks, or examining the engine for vacuum leaks that may affect the EVAP system's performance. If the problem persists, consider consulting a professional technician or a dealer for advanced diagnostics.