my Honda Pilot Third Generation (2016-present) shakes when I brake what could be wrong

Honda Pilot Third Generation (2016-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Pilot Third Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on brake components to avoid burns.

Symptoms

•Vibration felt in the steering wheel during braking
•Shaking or pulsation in the brake pedal
•Uneven wear on brake pads or rotors
•Noise such as grinding or squeaking while braking
•Vehicle pulling to one side during braking

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for wear and proper alignment.
3
Examine suspension components, including control arms and ball joints.
4
Verify tire condition and balance.
5
Scan the vehicle for any trouble codes related to the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake cleaner
•Rotor puller
•Jack
•Jack stands

Parts Required

•New brake rotors
•New brake pads
•Suspension components (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Disconnect the battery to avoid any electrical issues.

2. Inspect and Replace Brake Rotors

Tools Required: Socket set, torque wrench, brake cleaner, and a rotor puller (if necessary).
Sub-steps:
1. Remove the wheel using a socket set.
2. Unbolt the brake caliper and hang it securely to avoid stressing the brake line.
3. Remove the brake pads and inspect for wear.
4. Check the rotors for warping using a dial indicator; if warped beyond specification (usually 0.002 inches), replace.
5. If necessary, replace the rotors by removing the retaining screws and sliding them off the hub.
6. Clean the hub surface with brake cleaner before installation.

3. Inspect and Replace Brake Pads

Tools Required: Same as above.
Sub-steps:
1. Remove old brake pads from the caliper bracket.
2. Install new brake pads, ensuring they are properly aligned.
3. Apply brake grease to the back of the pads to reduce noise.
4. Reinstall the brake caliper over the new pads and torque the bolts to the manufacturer’s specifications.

4. Inspect Suspension Components

Tools Required: Jack, jack stands, and a torque wrench.
Sub-steps:
1. Lift the vehicle and secure it with jack stands.
2. Inspect control arms, ball joints, and bushings for wear or damage.
3. Replace any worn components according to manufacturer specifications.

5. Reassemble and Test

Tools Required: Same as above.
Sub-steps:
1. Reinstall the wheel and torque the lug nuts to the manufacturer’s specifications.
2. Reconnect the battery and start the vehicle.
3. Perform a test drive to ensure the issue is resolved.