how to reset the maintenance light on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

383 words

Problem Statement

Learn how to reset the maintenance light on Honda Pilot Third Generation (2016-present) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode or 'Neutral' before attempting to reset the maintenance light.

Symptoms

•Maintenance reminder light remains illuminated
•Dashboard displays 'Maintenance Due' message
•Maintenance light does not turn off after maintenance is completed

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Use the odometer button to toggle the display until the 'Oil Life' appears on the screen.
3
Press and hold the odometer button until the oil life percentage begins to blink.
4
While the oil life percentage is blinking, press and hold the odometer button again until it resets to 100%.
5
Verify that the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Odometer button
•Vehicle's ignition key

Parts Required

•No parts needed for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Use the odometer button to toggle the display until the 'Oil Life' appears on the screen.
3
Press and hold the odometer button until the oil life percentage begins to blink.
4
While the oil life percentage is blinking, press and hold the odometer button again until it resets to 100%.
5
Verify that the maintenance light has turned off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools, such as a flathead screwdriver (if needed to assist with button pressing).

2. Turn Ignition On

Insert the key into the ignition and turn it to the "ON" position without starting the engine.

Locate the odometer button on the instrument panel.
Press the odometer button repeatedly until the "Oil Life" is displayed on the screen.

4. Reset Oil Life

Press and hold the odometer button until the oil life percentage starts to blink.
While blinking, press and hold the odometer button again until the oil life resets to 100%.

5. Verify Reset

Turn off the ignition and then turn it back on to check that the maintenance light is no longer illuminated.