FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the check engine light on Honda Pilot Third Generation (2016-present) - Honda Pilot
Home/Cars/Honda/Pilot/Third Generation (2016-present)/how to reset the check engine light on Honda Pilot Third Generation (2016-present)

how to reset the check engine light on Honda Pilot Third Generation (2016-present)

Honda Pilot Third Generation (2016-present)

Error Codes
15-30 minutes
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
465 words

Problem Statement

Learn how to reset the check engine light on Honda Pilot Third Generation (2016-present) with step-by-step instructions and necessary tools.

Affected Component
Electrical
Estimated Time
15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always turn off the ignition and disconnect the battery before working on electrical components.

Symptoms

  • •Check engine light illuminated on the dashboard
  • •Potentially associated warning codes stored in the vehicle's computer
  • •No noticeable performance issues if the underlying problem is resolved

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set

Parts Required

  • •None required for the reset process

Additional Information

Affected Component
Electrical
Estimated Time
15-30 minutes
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Have an OBD-II scanner ready for use.
2. Using an OBD-II Scanner
  1. Locate the OBD-II Port: Find the OBD-II connector, typically located under the dashboard near the driver's seat.
  2. Connect the Scanner: Plug the OBD-II scanner into the port.
  3. Turn on the Ignition: Without starting the engine, turn the ignition key to the "On" position (or press the start button without pressing the brake, depending on the model).
  4. Access the Scanner Menu: Follow the instructions on the scanner to read codes and reset the CEL.
  5. Reset Codes: Select the option to clear or reset the trouble codes. Confirm any prompts to proceed.
  6. Disconnect the Scanner: Once the codes are cleared, unplug the OBD-II scanner from the port.
3. Disconnecting the Battery (if needed)
  1. Turn off the Ignition: Ensure the ignition is completely off.
  2. Disconnect Negative Terminal: Use a socket set to loosen the negative battery terminal and remove it.
  3. Wait for 10-15 Minutes: This allows the vehicle's computer to reset.
  4. Reconnect Negative Terminal: Reattach the negative battery terminal and tighten it securely.
  5. Start the Vehicle: Turn on the engine and check if the check engine light is off.