how to fix B0090 code in Honda Pilot YF3 (2016-2022)

Honda Pilot Third Generation (2016-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: B0090

3 min read

560 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix B0090 code related to the driver's seat belt tensioner in Honda Pilot 2016-2022. Step-by-step guide with tools and safety tips.

Error Code

B0090

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the SRS system to prevent airbag deployment.
•Allow the vehicle to sit for at least 10 minutes after disconnecting the battery to ensure any residual voltage is discharged.

Symptoms

•Airbag warning light illuminated
•Malfunction indicator lamp (MIL) active
•Potential issues with seat belt retraction
•Inconsistent seat belt tension during impacts
•Possible failure of airbag deployment system

Diagnostic Steps

1
Use an OBD-II scanner to confirm the presence of the B0090 code and check for any other related codes.
2
Inspect the driver's seat belt tensioner wiring for damage, corrosion, or loose connections.
3
Visually inspect the seat belt assembly for signs of wear or malfunction.
4
Check the seat belt tensioner connector for proper fit and continuity using a multimeter.
5
Perform a functional test of the seat belt tensioner by referring to the service manual for specifications.
6
Clear the DTCs from the vehicle’s computer and conduct a test drive to see if the code reappears.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter

Parts Required

•Driver's seat belt tensioner (if faulty)
•Mounting bolts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Use an OBD-II scanner to confirm the presence of the B0090 code and check for any other related codes.
2
Inspect the driver's seat belt tensioner wiring for damage, corrosion, or loose connections.
3
Visually inspect the seat belt assembly for signs of wear or malfunction.
4
Check the seat belt tensioner connector for proper fit and continuity using a multimeter.
5
Perform a functional test of the seat belt tensioner by referring to the service manual for specifications.
6
Clear the DTCs from the vehicle’s computer and conduct a test drive to see if the code reappears.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Disconnect the negative battery terminal to avoid accidental airbag deployment.

2. Remove Driver’s Seat

Using a socket set, remove the bolts securing the driver's seat to the floor.
Carefully disconnect the electrical connectors from the seat, noting their positions.
Remove the seat from the vehicle and place it on a stable work surface.

3. Inspect and Replace Seat Belt Tensioner

Locate the seat belt tensioner under the seat.
Disconnect the electrical connector from the tensioner.
Remove the mounting bolts securing the tensioner using a socket wrench.
Inspect the tensioner for any signs of damage or wear. If faulty, replace with a new tensioner.
Install the new tensioner by securing it with bolts and reconnecting the electrical connector.

4. Reinstall Driver’s Seat

Reconnect the electrical connectors to the seat.
Position the seat back into place and secure it with the original bolts.
Torque the bolts to the manufacturer’s specifications, typically around 30-40 lb-ft.

5. Battery Reconnection and System Reset

Reconnect the negative battery terminal.
Use the OBD-II scanner to clear any stored codes in the SRS system.
Start the vehicle and verify that the airbag warning light is off.