how do I reset the maintenance light on my Honda Pilot Third Generation (2016-present)?

Honda Pilot Third Generation (2016-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the maintenance light on your Honda Pilot Third Generation (2016-present) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (for automatic transmissions) before resetting the maintenance light.

Symptoms

•Maintenance light is illuminated on the dashboard
•Reminder for scheduled service appears on the display
•Engine oil life percentage is not updated

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the 'Menu' button on the steering wheel controls and press it.
3
Navigate to the 'Vehicle Settings' using the arrow keys on the steering wheel.
4
Select 'Maintenance Reset' from the menu.
5
Follow the prompts on the display to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required specifically

Parts Required

•None required specifically

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the 'Menu' button on the steering wheel controls and press it.
3
Navigate to the 'Vehicle Settings' using the arrow keys on the steering wheel.
4
Select 'Maintenance Reset' from the menu.
5
Follow the prompts on the display to reset the maintenance light.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather the key fob or key for the vehicle.

2. Ignition Position

Insert the key into the ignition.
Turn the ignition switch to the "ON" position (do not start the engine).

Press the "Menu" button on the steering wheel.
Use the arrow keys to scroll through the menu options until "Vehicle Settings" is displayed.

4. Resetting Maintenance Light

Select "Maintenance Reset" from the settings menu.
Confirm the reset by selecting "Yes" when prompted.
The maintenance light should now be reset, and the engine oil life percentage will be updated.

5. Final Steps

Turn off the ignition.
Start the engine to ensure the maintenance light has been successfully reset.